Zyxel GS2210-48HP [390/444] Chapter 46 syslog setup

Chapter 46 Syslog Setup

GS2210 Series User’s Guide

390

Figure 276 Management > Syslog Setup

The following table describes the labels in this screen.

Table 196 Management > Syslog Setup

LABEL DESCRIPTION

Syslog Select Active to turn on syslog (system logging) and then configure the syslog setting

Logging Type This column displays the names of the categories of logs that the device can generate.

Active Select this option to set the device to generate logs for the corresponding category.

Facility The log facility allows you to send logs to different files in the syslog server. Refer to the

documentation of your syslog program for more details.

Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses

these changes if it is turned off or loses power, so use the Save link on the top

navigation panel to save your changes to the non-volatile memory when you are done

configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Syslog Server

Setup

Active Select this check box to have the device send logs to this syslog server. Clear the check

box if you want to create a syslog server entry but not have the device send logs to it

(you can edit the entry later).

Server Address Enter the IP address of the syslog server.

Log Level Select the severity level(s) of the logs that you want the device to send to this syslog

server. The lower the number, the more critical the logs are.