Zyxel GS2210-48HP [90/444] Dhcpv6 client setup

Chapter 8 Basic Setting

GS2210 Series User’s Guide

The following table describes the labels in this screen.

8.10.9 DHCPv6 Client Setup

Use this screen to configure the Switch’s DHCP settings when it is acting as a DHCPv6 client. Click

the link next to DHCPv6 Client Setup in the IPv6 Configuration screen to display the screen as

shown next.

Table 29 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Neighbor Setup

LABEL DESCRIPTION

Interface Type Select the type of IPv6 interface for which you want to configure. The Switch supports the

VLAN interface type for IPv6 at the time of writing.

Interface ID Specify a unique identification number (from 1 to 4094) for the interface.

A static IPv6 neighbor entry displays in the Management > Neighbor Table screen only

when the interface ID is also created in the Basic Setup > Interface Setup screen.

To have IPv6 function properly, you should configure a static VLAN with the same ID number

in the Advanced Application > VLAN screens.

Neighbor

Address

Specify the IPv6 address of the neighboring device which can be reached through the

interface.

MAC Specify the MAC address of the neighboring device which can be reached through the

interface.

Add Click this to create a new entry or to update an existing one.

This saves your changes to the Switch’s run-time memory. The Switch loses these changes if

it is turned off or loses power, so use the Save link on the top navigation panel to save your

changes to the nonvolatile memory when you are done configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Clear Click Clear to reset the fields to the factory defaults.

Index This is the interface index number. Click on an index number to change the settings.

Interface This is the name of the IPv6 interface you created.

Neighbor

Address

This field displays the IPv6 address of the neighboring device which can be reached through

the interface

MAC This field displays the MAC address of the neighboring device which can be reached through

the interface.

Select an entry’s check box to select a specific entry. Otherwise, select the check box in the

table heading row to select all entries.

Delete Check the entry(ies) that you want to remove and then click Delete to remove the selected

entry(ies) from the summary table.

Cancel Click Cancel to clear the check boxes.