Zyxel OLT2412 [157/326] System wide queuing commands

Chapter 22 Queuing Method

OLT2412 User’s Guide

157

22.4 System-Wide Queuing Commands

The following section lists the commands for this feature.

22.5 System-Wide Queuing Command Examples

This example assigns weight values (1,2,3,4,12,13,14,15) to the physical queues (Q0 to Q8) on XE

port 2 in slot 3.

This example configures Gigabit port 1 in slot 6 to use SPQ.

Table 81 System-Wide Queuing Commands

COMMAND DESCRIPTION

queue priority <0-7> level <0-7>

Sets the IEEE 802.1p priority level-to-physical queue mapping.

priority <0-7>: IEEE 802.1p defines up to eight separate traffic

types by inserting a tag into a MAC-layer frame that contains bits

to define class of service. Frames without an explicit priority tag

are given the default priority of the ingress port.

level <0-7>: The OLT has up to 7 physical queues that you can

map to the 8 priority levels. On the OLT, traffic assigned to higher

index queues gets through faster while traffic in lower index

queues is dropped if the network is congested.

OLT2412(config)# interface port-channel xe-3-2

OLT2412(config-interface)# weight 1 2 3 4 12 13 14 15

OLT2412(config)# interface port-channel ge-6-1

OLT2412(config-interface)# spq