Zyxel OLT2412 [48/326] Remote telnet

Chapter 4 CLI Introduction

OLT2412 User’s Guide

4.1.3 Remote Telnet

1 Connect to the OLT through an uplink or GE port.

2 Open a Telnet session to the OLT’s in-band management IP address.

Make sure your computer IP address is in the same subnet, unless you are accessing the OLT

through one or more routers.

4.1.4 SSH

1 Connect your computer to one of the Ethernet ports.

2 Use an SSH client program to access the OLT. If this is your first login, use the default values in

Table 17 on page 48 and the user name and password on the cover of this document. Make sure

your computer IP address is in the same subnet, unless you are accessing the OLT through one or

more routers.

4.2 Logging In

Use the user name and password on the cover of this document for the first login.

Note: The OLT automatically logs you out of the management interface after five minutes

of inactivity. If this happens to you, simply log back in again.

4.3 Using Shortcuts and Getting Help

This table identifies some shortcuts in the CLI and how to get help.

Table 17 Default In-band Management IP Address

SETTING DEFAULT VALUE

IP Address 192.168.1.1

Subnet Mask 255.255.255.0

Table 18 CLI shortcuts and help

COMMAND /

KEY(S)

DESCRIPTION

history

Displays a list of recently-used commands.

 (up/down arrow

keys)

Scrolls through the list of recently-used commands. You can edit a command or press

[ENTER] to run it again.

[CTRL]+u

Clears the current command.

[CTRL]+Z

Returns to the previous mode.

[TAB]

Auto-completes the keyword you are typing if possible. For example, type config, and

press

[TAB]. The OLT finishes the word configure.