Moxa EDR-810-VPN-2GSFP [123/139] Global settings

Industrial Secure Router User's Manual Virtual Private Network (VPN)

9-3

Global Settings

The Industrial Secure Router provides 3 Global Settings for VPN applications.

All IPSec Connection

Users can Enable or Disable all VPN services with this configuration.

NOTE

The factor

y default setting is Disable, so when the user wants to use VPN function, make sure the setting is

enabled.

IPSec NAT-T Enable

If there is an external NAT device between VPN tunnels, the user must enable the NAT-T (NAT-Traversal)

function.

VPN Event Log

To enable the VPN event log function, select the Enable option in Log Enable and click Flash, Syslog, or

SNMP Trap. You may also define the severity and record it in the event.

IPSec Settings

IPSec Quick Setting

The Industrial Secure Router’s Quick Setting mode can be used to easily set up a site-to-site VPN tunnel for

two Industrial Secure Router units.

When choosing the Quick setting mode, the user just needs to configure the following:

• Tunnel Setting

• Security Setting

 Encryption Strength: Simple (AES-128), Standard (AES-192), Strong (AES-256)

 Password of Pre-Shared Key

NOTE

The Encryption strength and Pre

-Shared key should be configured identically for both Industrial Secure R

outer

units.

IPSec Advanced Setting

Click Advanced Setting to configure detailed VPN settings.