Gigabyte X299-WU8 (rev. 1.0) [64/136] Power loading

BIOS Setup

- 64 -

& Power On Password

Set the password when Power On By Keyboard is set to Password.

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept.

To turn on the system, enter the password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>

again without entering the password to clear the password settings.

& Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled  Disablesthisfunction.(Default)

Move Move the mouse to turn on the system.

Double Click Double click on left button on the mouse to turn on the system.

& ErP

 DetermineswhethertoletthesystemconsumeleastpowerinS5(shutdown)state.(Default:Disabled)

Note: When this item is set to Enabled,thefollowingfunctionswillbecomeunavailable:ResumebyAlarm,

power on by mouse, and power on by keyboard.

& Soft-Off by PWR-BTTN

 ConguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.

Instant-Off  Pressthepowerbuttonandthenthesystemwillbeturnedoffinstantly.(Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

& Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to Enabled. AutoletstheBIOSautomaticallycongurethis

setting.(Default:Auto)

& Resume by Alarm

 Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled)

If enabled, set the date and time as following:

Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.