Gigabyte X299-WU8 (rev. 1.0) [77/136] 77 configuring a raid set

- 77 -

Conguring a RAID Set

Step 5:

Enter the array capacity and press <Enter>. Finally press <Enter> on the Create Volume item to begin creating

theRAIDarray.Whenpromptedtoconrmwhethertocreatethisvolume,press<Y>toconrmor<N>to

cancel(Figure17).

Whencompleted,youcanseedetailedinformationabouttheRAIDarrayintheDISK/VOLUME INFORMATION

section,includingtheRAIDlevel,stripeblocksize,arrayname,andarraycapacity,etc.(Figure18)

ToexittheRAIDBIOSutility,press<Esc>orselect6. Exit in MAIN MENU.

Now,youcanproceedtoinstalltheSATARAID/AHCIdriverandoperatingsystem.

Figure 17

Figure 18

Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.2925

Press ENTER to create the specied volume.

[

]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select

[ HELP ]

Name : Volume0

RAID Level : RAID0(Stripe)

Disks : Select Disks

Strip Size : 16 KB

Capacity : 1863.0 GB

Sync : N/A

Create Volume

[ CREATE VOLUME MENU ]

WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N) :

Intel(R) Rapid Storage Technology - Option ROM - 15.7.0.2925

RAID Volumes :

ID Name Level Strip Size Status Bootable

0 Volume0 RAID0(Stripe) 16KB 1.8TB Normal Ye s

Physical Devices :

ID Device Model Serial # Size Type/Status(Vol ID)

1 TOSHIBA DT01ACA1 763ZLL4FS 931.5GB Non-RAID Disk

2 TOSHIBA DT01ACA1 763ZM7MFS 931.5GB Non-RAID Disk

[

]-Select [ESC]-Exit [ENTER]-Select Menu

[ DISK/VOLUME INFORMATION ]

[ MAIN MENU ]

4. Recovery Volume Options

5. Acceleration Options

6. Exit

1. Create RAID Volume

2. Delete RAID Volume

3. Reset Disks to Non-RAID