Gigabyte X299-WU8 (rev. 1.0) [68/136] B configuringsatacontrollermodeinbiossetup

Conguring a RAID Set

- 68 -

The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.

The actual BIOS Setup menu options you will see shall depend on the motherboard you have and

the BIOS version.

B.ConguringSATAcontrollermodeinBIOSSetup

MakesuretoconguretheSATAcontrollermodecorrectlyinsystemBIOSSetup.

Step 1:

Turnonyourcomputerandpress<Delete>toenterBIOSSetupduringthePOST(Power-OnSelf-Test).Goto

Peripherals\SATAAndRSTConguration, make sure SATA Controller(s)isenabled.TocreateRAID,set

SATA Mode Selection to Intel RST Premium(Figure1).Note:WhenusingaPCIeSSD,makesuretosetthe

Use RST Legacy OROM item under Peripherals\SATAAndRSTConguration to Disabled. Then depending

the M.2 connector you use. Finally, save the settings and exit BIOS Setup.

Step 2:

TousetheEZRAIDfeature,followthestepsin"C-1."TocongureUEFIRAID,followthestepsin"C-2."To

enterthelegacyRAIDROM,referto"C-3"formoreinformation.Finally,savethesettingsandexitBIOSSetup.

Figure 1