Electrolux ECG6600 [125/616] Preparing hot water

Electrolux ECG6600 [125/616] Preparing hot water
g
125
fixed in the «CAPPUCCINO PRO-
GRAM» menu.
0 Swing the milk dispenser pipe out
(Figure 28) and place a sufficiently big
cup underneath the coffee dispenser
and the milk dispenser pipe.
0 Press once on the "jug/cappuccino"
button (Figure 29).
Hot and frothy milk, then coffee, are
dispensed into the cup.
The top line of the display shows
«CAPPUCCINO» and on the bottom
line a progress bar and percentage are
displayed, e.g.
«
 40%»
which shows progress of the cappuc-
cino being made.
3
The amount of milk and coffee is pre-
set to normal quantities. You can
change and save these to suit your
taste, see „Setting the cappuccino pro-
gramme (programming the quantity of
milk and coffee)“ page 129.
After a few seconds the appliance is
ready for use again. The display shows
the last selected coffee setting.
10.2 Frothing/heating up milk
0 Swing the milk dispensing pipe out
(Figure 28) and place a sufficiently big
cup underneath the milk dispensing
pipe.
0 Press twice on the "jug/cappuccino"
button (Figure 29) (within
2 seconds of each other).
Hot and frothy milk is dispensed into
the cup.
The top line of the display shows
«MILK FROTHING» and on the bot-
tom line a progress bar and percentage
are displayed, e.g.
«
 40%»
which shows progress of the milk
frothing process.
3
The amount of milk is preset to a nor-
mal quantity. You can change and save
this to suit your taste, see „Setting the
cappuccino programme (programming
the quantity of milk and coffee)“
page 129.
After a few seconds the appliance is
ready for use again. The display shows
the last selected coffee setting.
10.3 Cleaning the nozzles
Every time after heating milk or mak-
ing cappuccino, the nozzles on the milk
container have to be cleaned as fol-
lows, otherwise remains of milk can set
hard:
0 Place a container under the milk dis-
penser pipe and press on the "CLEAN"
button on the milk container
(Figure 30) for at least 5 seconds. The
display shows «CLEANING».
1
Warning! Risk of scalding from steam
and hot water escaping from the milk
dispenser pipe.
0 Now remove the milk container and
clean the nozzles on the appliance
with a damp cloth (Figure 31).
0 Put the hot water nozzle back in
(Figure 10).
3
When you have finished cleaning, take
the milk container off and place it in the
fridge. The milk should not stay out of
the fridge for longer than 15 minutes.
11 Preparing hot water
Hot water can be used to warm up
cups andto make hot drinks, such as
tea or packet soups.
1
Warning! Risk of scalding when the hot
water nozzle is activated! Escaping hot
water can lead to scalds. Only activate
the hot water nozzle when there is a
receptacle under the hot water nozzle.
0 Put the hot water nozzle in place
(Figure 10).
0 Place a container underneath the hot
water nozzle.
0 Press the "hot water" button (Figure
32). Hot water is dispensed; the display
shows «HOT WATER» Once the pro-
grammed amount of hot water has
822_949_354 ECG6600-East_Elux.book Seite 125 Freitag, 1. Februar 2008 11:36 23

Содержание

S22 949 354 ECG6600 East Elux book Seito 125 Freitag 1 Februar 2008 11 36 23 fixed in the CAPPUCCINO PRO GRAM menu US Swing the milk dispenser pipe out Figure 28 and place a sufficiently big cup underneath the coffee dispenser and the milk dispenser pipe US Press once on the jug cappuccino button FP fti Figure 29 Hot and frothy milk then coffee are dispensed into the cup The top line of the display shows CAPPUCCINO and on the bottom line a progress bar and percentage are displayed e g 40 which shows progress of the cappuc cino being made j The amount of milk and coffee is preset to normal quantities You can change and save these to suit your taste see Setting the cappuccino pro gramme programming the quantity of milk and coffee page 129 After a few seconds the appliance is ready for use again The display shows the last selected coffee setting 10 2 Frothing heating up milk US Swing the milk dispensing pipe out Figure 28 and place a sufficiently big cup underneath the milk dispensing pipe US Press twice on the jug cappuccino button rT ft1 Figure 29 within 2 seconds of each other Hot and frothy milk is dispensed into the cup The top line of the display shows MILK FROTHING and on the bot tom line a progress bar and percentage are displayed e g 40 which shows progress of the milk frothing process j The amount of milk is preset to a nor mal quantity You can change and save this to suit your taste see Setting the cappuccino programme programming the quantity of milk and coffee page 129 After a few seconds the appliance is ready for use again The display shows the last selected coffee setting 10 3 Cleaning the nozzles Every time after heating milk or mak ing cappuccino the nozzles on the milk container have to be cleaned as fol lows otherwise remains of milk can set hard US Place a container under the milk dis penser pipe and press on the CLEAN button on the milk container Figure 30 for at least 5 seconds The display shows CLEANING j Warning Risk of scalding from steam and hot water escaping from the milk dispenser pipe BSP Now remove the milk container and clean the nozzles on the appliance with a damp cloth Figure 31 BSP Put the hot water nozzle back in Figure 10 When you have finished cleaning take the milk container off and place it in the fridge The milk should not stay out of the fridge for longer than 15 minutes 11 Preparing hot water Hot water can be used to warm up cups andto make hot drinks such as tea or packet soups j Warning Risk of scalding when the hot water nozzle is activated Escaping hot water can lead to scalds Only activate the hot water nozzle when there is a receptacle under the hot water nozzle BSP Put the hot water nozzle in place Figure 10 BSP Place a container underneath the hot water nozzle US Press the hot water button m Figure 32 Hot water is dispensed the display shows HOT WATER Once the pro grammed amount of hot water has 125