Electrolux ECG6600 [136/616] Solvable problems before

Electrolux ECG6600 [136/616] Solvable problems before
g
136
«INSERT BREWING UNIT !»
Someone probably forgot to put the
brewing unit back in the coffee
machine after cleaning it.
0 Insert the brewing unit, see „Cleaning
the brewing unit“ page 132
«GENERAL ALARM»
The inside of the machine is very dirty.
0 Carefully clean the inside of the
machine, see „Cleaning the brewing
unit“ page 132. If the coffee machine
still shows this message once it has
been cleaned, please consult customer
services.
16 Solvable problems, before
calling customer services
If the coffee machine does not work,
you can easily find out the cause of the
problem and fix it by turning to the
advice in Chapter „What to do when
the display show the following
messages...“ page 135. If, on the other
hand, the coffee machine displays no
message, please carry out the following
checks before consulting customer
services.
Coffee is not hot
The cups were not preheated.
0 Preheat the cups by rinsing them out
with warm water or leaving them at
least 20 minutes on the heated cup
tray (H) (see „Tips for dispensing hotter
coffee“ page 122).
The brewing unit is too cold.
0 Warm up the brewing unit with the
rinsing programme before making cof-
fee (see „Rinsing“ page 122).
The coffee does not have enough
crema
The coffee is too coarsely ground.
0 Turn the knob for the grind level set-
ting one position anti-clockwise (see
„Setting the grind level“ page 126).
The coffee blend is not suitable.
0 Use a coffee blend suited to fully auto-
mated coffee machines.
Coffee comes out too slowly
The coffee is ground too fine.
0 Turn the knob for the grind level set-
ting one position clockwise (see „Set-
ting the grind level“ page 126).
Coffee comes out too quickly
The coffee is too coarsely ground.
0 Turn the knob for the grind level set-
ting one position anti-clockwise (see
„Setting the grind level“ page 126).
Coffee only comes out of one of the
spouts on the coffee dispenser
The holes on the spouts are blocked.
0 Remove the dried on coffee with a
needle (Figure 29).
When the function or is selected,
water comes out of the machine
instead of coffee
The ground coffee could have got
stuck in the filling chute.
0 Remove the ground coffee blocking
the filling chute with the help of a
knife (see „Makingcoffee with ground
coffee“ page 123) (Figure 22). Then
clean the brewing unit and the inside
of the machine (see „Cleaning the
brewing unit“ page 132)
The machine does not switch on
when the button is pressed
The main switch on the back of the
appliance is not switched on (Figure 8)
or the mains plug is not plugged in.
0 Check that the main switch is in the "I"
position and that the power lead is
plugged in the socket properly.
The brewing unit cannot be taken
out for cleaning
The coffee machine is switched on. The
brewing unit can only be removed
when the machine is switched off.
0 Switch the appliance off and remove
the brewing unit (see „Cleaning the
brewing unit“ page 132).
822_949_354 ECG6600-East_Elux.book Seite 136 Freitag, 1. Februar 2008 11:36 23

Содержание

S22 949 354 ECG6600 East Elux book Seito 136 Freitag 1 Februar 2008 11 36 23 GB INSERT BREWING UNIT Someone probably forgot to put the brewing unit back in the coffee machine after cleaning it Civ Insert the brewing unit see Cleaning the brewing unit page 132 GENERAL ALARM Hie inside of the machine is very dirty Civ Carefully clean the inside of the machine see Cleaning the brewing unit page 132 If the coffee machine still shows this message once it has been cleaned please consult customer services 16 Solvable problems before calling customer services If the coffee machine does not work you can easily find out the cause of the problem and fix it by turning to the advice in Chapter What to do when the display show the following messages page 135 If on the other hand the coffee machine displays no message please carry out the following checks before consulting customer services Coffee is not hot Ilie cups were not preheated Civ Preheat the cups by rinsing them out with warm water or leaving them at least 20 minutes on the heated cup tray H see Tips for dispensing hotter coffee page 122 Tlie brewing unit is too cold Civ Warm up the brewing unit with the rinsing programme before making cof fee see Rinsing page 122 The coffee does not have enough crema Tlie coffee is too coarsely ground Civ Turn the knob for the grind level set ting one position anti clockwise see Setting the grind level page 126 Tlie coffee blend is not suitable Civ Use a coffee blend suited to fully auto mated coffee machines Coffee comes out too slowly Tlie coffee is ground too fine Civ Turn the knob for the grind level set ting one position clockwise see Set ting the grind level page 126 Coffee comes out too quickly Tlie coffee is too coarsely ground Civ Turn the knob for the grind level set ting one position anti clockwise see Setting the grind level page 126 Coffee only comes out of one of the spouts on the coffee dispenser Tlie holes on the spouts are blocked CSC Remove the dried on coffee with a needle Figure 29 When the function or is selected water comes out of the machine instead of coffee The ground coffee could have got stuck in the filling chute Civ Remove the ground coffee blocking the filling chute with the help of a knife see Makingcoffee with ground coffee page 123 Figure 22 Then clean the brewing unit and the inside of the machine see Cleaning the brewing unit page 132 The machine does not switch on when the button is pressed The main switch on the back of the appliance is not switched on Figure 8 or the mains plug is not plugged in Civ Check that the main switch is in the I position and that the power lead is plugged in the socket properly The brewing unit cannot be taken out for cleaning The coffee machine is switched on The brewing unit can only be removed when the machine is switched off Civ Switch the appliance off and remove the brewing unit see Cleaning the brewing unit page 132 136