Electrolux ECG6600 Инструкция по эксплуатации онлайн [134/616] 77437

Electrolux ECG6600 Инструкция по эксплуатации онлайн [134/616] 77437
g
134
0 Before starting the descaling pro-
gramme, clean the brewing unit (see
„Cleaning the brewing unit“ page 132).
0 Press the "MENU" button (Figure5). The
menu option «CHOOSE LAN-
GUAGE» appears.
0 Press the scrolling buttons "<" or ">"
(Figure 6) until the menu option
«DESCALE» appears.
0 Confirm the menu option with the
"OK" button (Figure 6). The display
shows «DESCALE NO».
0 Press thescrolling button "<", and the
display shows «DESCALE YES».
0 Confirm with the "OK" button
(Figure 6). The descaling programme
starts.
3
If "OK" is not pressed, the appliance
automatically returns to the coffee
mode after about 120 seconds and the
descaling programme is not started.
The top line of the display alternates
between «ADD DESCALER» and
«PRESS MENU KEY» whilst the
bottom of the display shows a progress
bar and percentage,
«
0%».
0 Empty the water tank, fill it with at
least 1 litre of water and add the des-
caling agent.
1
Warning: Make sure that any splashes
from the descaling agent do not come
into contact with surfaces that are
sensitive to acids, such as marble, lime-
stone and ceramic.
0 Insert the hot water nozzle (Figure 10).
0 Put a container with a capacity of at
least 1.5 litres underneath the hot
water nozzle.
0 Press the "MENU" button (Figure 5).
The descaling programmestarts and the
descaling liquid runs out of the hot
water nozzle. The display shows
«DESCALING» and a progress bar
shown with a percentage, e.g.
«
 25%».
The descaling programme automati-
cally goes through a series of rinses
and pauses to remove limescale depos-
its from the inside of the coffee
machine.
After about 45 minutes the water tank
is empty and the top line of the display
alternates between «DESCALE
COMPLETE» and «PRESS MENU
KEY» whilst the bottom line shows a
progress bar and a percentage
«
 50%».
0 Press the "MENU" button (Figure 5).
The appliance is now ready for a rins-
ing process with clean water. The top
line of the display alternates between
«RINSING» and «FILL TANK !»
whilst the bottom of the display shows
a progress bar and percentage
«
 50%».
0 Take out the water tank, fill it with
clean water and put it back in place.
The top line of the display alternates
between «RINSING» and «PRESS
MENU KEY» whilst the bottom of the
display shows a progress bar and per-
centage
«
 50%».
0 Empty the container under the hot
water nozzle and put it back under the
hot water nozzle.
0 Press the "MENU" button (Figure 5).
A rinsing process takes place with clean
water and the rinsing water runs out
of the hot water nozzle. The display
shows «RINSING » and a progress
bar shown with a percentage, e.g.
«
 55%».
After a few minutes the water tank is
empty and the top line of the display
alternates between «RINSING
COMPLETE» and «PRESS MENU
KEY» whilst the bottom line shows a
progress bar and a percentage
«
 90%».
0 Press the "MENU" button (Figure 5).
For a short time the top line of the dis-
play alternates between «RINSING
COMPLETE» and «FILL TANK !»
whilst the bottom line of the display
822_949_354 ECG6600-East_Elux.book Seite 134 Freitag, 1. Februar 2008 11:36 23

Содержание

S22 949 354 ECG6600 East Elux book Seite 134 Freitag 1 Februar 2008 11 36 23 GB US Before starting the descaling pro gramme clean the brewing unit see Cleaning the brewing unit page 132 and pauses to remove limescale depos its from the inside of the coffee machine US Press the MENU button Figure5 The menu option CHOOSE LAN GUAGE appears After about 45 minutes the water tank is empty and the top line of the display alternates between DESCALE COMPLETE and PRESS MENU KEY whilst the bottom line shows a progress bar and a percentage US Press the scrolling buttons or Figure 6 until the menu option DESCALE appears Civ Confirm the menu option with the OK button Figure 6 The display shows DESCALE NO US Press thescrolling button and the display shows DESCALE YES Civ Confirm with the OK button Figure 6 The descaling programme starts j If OK is not pressed the appliance automatically returns to the coffee mode after about 120 seconds and the descaling programme is not started The top line of the display alternates between ADD DESCALER and PRESS MENU KEY whilst the bottom of the display shows a progress bar and percentage 0 US Empty the water tank fill it with at least 1 litre of water and add the des caling agent j Warning Make sure that any splashes from the descaling agent do not come into contact with surfaces that are sensitive to acids such as marble lime stone and ceramic Civ Insert the hot water nozzle Figure 10 Civ Put a container with a capacity of at least 1 5 litres underneath the hot water nozzle Civ Press the MENU button Figure 5 The descaling programmestartsand the descaling liquid runs out of the hot water nozzle The display shows DESCALING and a progress bar shown with a percentage e g 25 The descaling programme automati cally goes through a series of rinses 134 50 Press the MENU button Figure 5 The appliance is now ready for a rins ing process with clean water The top line of the display alternates between RINSING and FILL TANK whilst the bottom of the display shows a progress bar and percentage 50 Take out the water tank fill it with clean water and put it back in place The top line of the display alternates between RINSING and PRESS MENU KEY whilst the bottom of the display shows a progress bar and per centage 50 Empty the container under the hot water nozzle and put it back under the hot water nozzle Press the MENU button Figure 5 A rinsing process takes place with clean water and the rinsing water runs out of the hot water nozzle The display shows RINSING and a progress bar shown with a percentage e g 55 After a few minutes the water tank is empty and the top line of the display alternates between RINSING COMPLETE and PRESS MENU KEY whilst the bottom line shows a progress bar and a percentage 90 Press the MENU button Figure 5 For a short time the top line of the dis play alternates between RINSING COMPLETE and FILL TANK whilst the bottom line of the display