Hitachi DB 3 DL [10/58] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi DB 3 DL [10/58] English

Hitachi DB 3 DL [10/58] English
English
9
CAUTION:
䡬 The selection examples shown in Table 3 should be
considered as general standard. As different types of
tightening screws and different materials to be
tightened are used in actual works proper adjustments
are naturally necessary.
䡬 When using the driver drill with a machine screw at
HIGH (high speed), a screw may damage or a bit may
loose due to the tightning torque is too strong. Use
the driver drill at LOW (low speed) when using a
machine screw.
NOTE:
The use of the battery EBM315 in a cold condition
(below 0 degree Centigrade) can sometimes result in
the weakened tightening torque and reduced amount
of work. This, however, is a temporary phenomenon,
and returns to normal when the battery warms up.
MAINTENANCE AND INSPECTION
1. Inspecting the tool
Since use of as dull tool will degrade efficiency and
cause possible motor malfunction, sharpen or replace
the tool as soon as abrasion is noted.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure
that they are properly tightened. Should any of the
screws be loose, retighten them immediately. Failure
to do so could result in serious hazard.
3. Maintenance of the motor
The motor unit winding is the very “heart” of the
power tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Cleaning on the outside
When the driver drill is stained, wipe with a soft dry
cloth or a cloth moistened with soapy water. Do not
use chloric solvents, gasoline or paint thinner, for
they melt plastics.
5. Storage
Store the driver drill in a place in which the
temperature is less than 40°C and out of reach of
children.
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
Repair, modification and inspection of Hitachi Power
Tools must be carried out by an Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a Hitachi Authorized Service Center.
NOTE:
Due to HITACHI’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 71 dB (A)
Measured A-weighted sound pressure level: 60 dB (A)
Uncertainty KpA: 3 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value: 3.1 m/s
2
.

Содержание

Похожие устройства

English CAUTION O The selection examples shown in Table 3 should be considered as general standard As different typesof tightening screws and different materials to be tightened are used in actual works proper adjustments are naturally necessary O When using the driver drill with a machine screw at HIGH high speed a screw may damage or a bit may loose due to the lightning torque is too strong Use the driver drill at LOW low speed when using a machine screw NOTE The use of the battery EBM315 in a cold condition below 0 degree Centigrade can sometimes result in the weakened tightening torque and reduced amount of work This however is a temporary phenomenon and returns to normal when the battery warms up MAINTENANCE AND INSPECTION 1 Inspecting the tool Since use of as dull tool will degrade efficiency and cause possible motor malfunction sharpener replace the tool as soon as abrasion is noted 2 Inspecting the mounting screws Regularly inspect all mounting screws and ensure that they are properly tightened Should any of the screws be loose retighten them immediately Failure to do so could result in serious hazard 3 Maintenance of the motor The motor unit winding is the very heart of the power tool Exercise due care to ensure the winding does not become damaged and or wet with oil or water 4 Cleaning on the outside When the driver drill is stained wipe with a soft dry cloth or a cloth moistened with soapy water Do not use chloric solvents gasoline or paint thinner for they melt plastics 5 Storage Store the driver drill in a place in which the temperature is less than 40 C and out of reach of children 6 Service parts list A Item No B Code No C No Used D Remarks CAUTION Repair modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance In the operation and maintenance of power tools the safety regulations and standards prescribed in each country must be observed MODIFICATIONS Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements Accordingly some parts i e code numbers and or design may be changed without prior notice 9 GUARANTEE We guarantee Hitachi Power Tools in accordance with statutory country specific regulation This guarantee does not cover defects or damage due to misuse abuse or normal wear and tear In case of complaint please send the Rower Tool undismantled with the GUARANTEE CERTIFICATE found at the end of this Handling instruction to a Hitachi Authorized Service Center NOTE Due to HITACHI S continuing program of research and development the specifications herein are subject to change without prior notice Information concerning airborne noise and vibration The measured values were determined according to EN60745 and declared in accordance with ISO 4871 Measured A weighted sound power level 71 dB A Measured A weighted sound pressure level 60 dB A Uncertainty KpA 3 dB A Wear ear protection The typical weighted value 3 1 m s2 root mean square acceleration

Скачать