Planet SGSW-24240 [67/328] Factory default

User’s Manual of WGSW-24040 / WGSW-24040R

SGSW-24040 / SGSW-24040R

4.2.9 Factory Default

The Factory Reset button can reset the Managed Switch back to the factory default mode. Be aware that the entire configuration

will be reset; include the IP address of the Managed Switch. Once the Factory Reset item is pressed, the screen in Figure

4-2-15 appears.

Figure 4-2-15 Factory Default Reset screen

After the “Factory” button be pressed and rebooted, the system will load the default IP settings as following:

。 Default IP address: 192.168.0.100

。 Subnet mask: 255.255.255.0

。 Default Gateway: 192.168.0.254

。 The other setting value is back to disable or none.

To reset the Managed Switch to the Factory default setting, you can also press the hardware

reset button at the front panel about 10 seconds. After the device be rebooted. You can login the

management WEB interface within the same subnet of 192.168.0.xx.

Hardware Reset button