Nissan Note [20/334] Air cleaner and air duct

EM-20

[CR]

AIR CLEANER AND AIR DUCT

disconnected. Refer to EC-69, "Throttle Valve Closed Position Learning" (WITH EURO-OBD), EC-486,

"Throttle Valve Closed Position Learning" (WITHOUT EURO-OBD).

● Perform the “Idle Air Volume Learning” and “Throttle Valve Closed Position Learning” when the electric

throttle control actuator is replaced. Refer to EC-69, "

Idle Air Volume Learning" and EC-69, "Throttle

Valve Closed Position Learning" (WITH EURO-OBD), EC-486, "Idle Air Volume Learning" and EC-

486, "Throttle Valve Closed Position Learning" (WITHOUT EURO-OBD).

2. Assemble the air cleaner case (upper) and (lower).

● Tighten bolts evenly in two steps in the order shown in figure.

3. Attach the air cleaner case assembly in the following order.

a. Attach the gasket (for the intake manifold (1) and the PCV path

(2))

● Attach for the intake manifold so that the case protrusion (4)

fit into the cutout hole (3) on the side of the gasket.

● Make sure foreign particles do not attach to the gasket or the

sealing area.

b. Insert the air cleaner case assembly into the intake manifold.

● At the same time, insert the bottom path protrusions into the

PCV path holes on the rocker cover.

CAUTION:

Insert straight, making sure the axis is lined up, to prevent the gaskets from being crooked or

twisted.

c. Tighten bolts in the numerical order shown in figure.

● Tighten bolts evenly in several steps.

CAUTION:

Tighten after making sure the positioning of bolts 5 and 6

is true.

4. Install air cleaner body and air cleaner filter. Refer to EM-21, "

Changing Air Cleaner Filter" .

5. Attach air duct.

6. Attach EVAP canister purge volume control solenoid valve.

7. Attach the manifold absolute pressure sensor.

● Make sure no foreign particles attach to the flange, O-ring, or attachment hole.

● Tighten the mounting bolt after making sure it is fully inserted into the mounting hole.

1st step

:1.9-2.2N·m(0.20-0.22kg-m,17-19in-lb)

2nd step

: 3.8 - 4.4 N·m (0.40 - 0.44 kg-m, 35 - 38 in-lb)

PBIC1420E

PBIC1295E

PBIC1419E