Al-Ko Robolinho 3000 Инструкция по эксплуатации онлайн [53/88] 93025

Assembly

ALKO

18.3

18.3.1

18.3.2

3. To avoid damage when mowing, make sure that the boundary cable is in direct contact with the

ground at all points when you are laying it.

4. If there are places where the boundary cable is not in direct contact with the ground, secure these with

an additional lawn peg.

Laying the boundary cable

mown. Lay your boundary cable around obstacles.

3. Lay the boundary wire so tightly, that the robot lawn the cable when driving not drags.

4. Lawns with grass more than 8 cm tall cannot be mown using the Robolinho© 3000, and will have to be

mown in advance before the boundary cable is laid.

5. Once the boundary cable has been laid on the grass, do not scarify the area of the boundary cable

any longer.

Laying options

The boundary cable can be laid on the lawn (1) and

as much as 10 cm under the turf (2). Have your dea

ler carry out the laying under the turf on your behalf.

^ If necessary,

Spare loops of cable

You should incorporate spare loops of cable at regu-

lar intervals in order to allow the base station to

be repositioned or the mowing area to be extended

even after the mowing area has been laid out. To do

this, guide the boundary cable around a lawn peg,

return to the previous lawn peg, then continue as

shown, securing with another lawn peg.

^ Select the number of spare cable loops accor-

ding to your own judgement.

474 481 b 53