![GRAPHITE 59G175 Инструкция по эксплуатации онлайн [12/100] 809850](/img/pdf.png)
GRAPHITE 59G175 Инструкция по эксплуатации онлайн [12/100] 809850
![GRAPHITE 59G175 Инструкция по эксплуатации онлайн [12/100] 809850](/views2/2041632/page12/bgc.png)
12
f) Do not use worn down wheels from larger power tools. Wheel
intended for larger power tool is not suitable for the higher speed
of a smaller tool and may burst.
Additional Safety Warnings Specic for Abrasive Cutting-O
Operations:
a) Do not “jam” the cut-o wheel or apply excessive pressure. Do
not attempt to make an excessive depth of cut. Overstressing
the wheel increases the loading and susceptibility to twisting or
binding of the wheel in the cut and the possibility of kickback or
wheel breakage.
b) Do not position your body in line with and behind the rotating
wheel. When the wheel, at the point of operation, is moving away
from your body, the possible kickback may propel the spinning
wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a cut for any
reason, switch o the power tool and hold the power tool
motionless until the wheel comes to a complete stop. Never
attempt to remove the cut-o wheel from the cut while the
wheel is in motion otherwise kickback may occur. Investigate
and take corrective action to eliminate the cause of wheel binding.
d) Do not restart the cutting operation in the workpiece. Let
the wheel reach full speed and carefully re-enter the cut. The
wheel may bind, walk up or kickback if the power tool is restarted
in the workpiece.
e) Support panels or any oversized workpiece to minimize the
risk of wheel pinching and kickback. Large workpieces tend to
sag under their own weight. Support must be placed under the
workpiece near the line of cut and near the edge of the workpiece
on both sides of the wheel.
f) Use extra caution when making a “pocket cut” into existing
walls or other blind areas. The protruding wheel may cut gas or
water pipes, electrical wiring or objects that can cause kickback.
Safety Warnings Specic for Sanding Operations:
a) Do not use excessively oversized sanding disc paper. Follow
manufacturers recommendations, when selecting sanding
paper. Larger sanding paper extending beyond the sanding pad
presents a laceration hazard and may cause snagging, tearing of
the disk or kickback.
Safety Warnings Specic for Polishing Operations:
a) Do not allow any loose portion of the polishing bonnet or its
attachment strings to spin freely. Tuck away or trim any loose
attachment strings. Loose and spinning attachment strings can
entangle your ngers or snag on the workpiece.
Safety Warnings Specic for Wire Brushing Operations:
a) Be aware that wire bristles are thrown by the brush even
during ordinary operation. Do not overstress the wires by
applying excessive load to the brush. The wire bristles can easily
penetrate light clothing and/or skin.
b) If the use of a guard is recommended for wire brushing, do
not allow any interference of the wire wheel or brush with the
guard. Wire wheel or brush may expand in diameter due to work
load and centrifugal forces.
Additional safety Warnings:
a) In tools adapted to attach grinding wheels with a threaded hole,
check whether the thread length of the grinding wheel is suitable
for the length of the spindle thread.
b) Secure the workpiece. Attaching the workpiece to the clamping
device or vise is safer than holding it in your hand.
c) Do not touch the cutting and grinding discs until they have
cooled down.
d) When using a quick-setting ange, make sure that the
internal ange mounted on the spindle is equipped with a
rubber O-ring and that the ring is undamaged. It should also
be ensured that the surfaces of the external ange and the
internal ange are clean.
e) Use the quick clamping ange only with abrasive and cutting
discs. Only use undamaged and properly functioning anges.
f) In the event of a temporary power outage in the network or after
removing the plug from the power socket with the switch in the "on"
position, before re-starting, unlock the switch and set it in the o position.
CAUTION! This device is designed to operate indoors. The design
is assumed to be safe, protection measures and additional safety
systems are used, nevertheless there is always a small risk of
injuries at work.
Descriptions of used pictograms.
1 2 3 4
5 6 7 8
1. Warning, take special precautions.
2. Read the instruction manual, observe warnings and safety
conditions included in it!
3. Use personal protection equipment (safety goggles, ear protectors).
4. Use safety gloves.
5. Disconnect the power cord, before maintenance or repair works
are begun.
6. Keep out of reach of children.
7. Protect against rain
8. Protection class II
DESIGN AND APPLICATION
The angle grinder is a hand-held power tool with the II class isolation.
The power tool is driven with a single-phase, commutator motor,
whose rotational speed is reduced by means of an intersecting
axis gear. The power tool can used both for grinding and cutting.
This type of power tools is widely used for removal of burrs from
metal surfaces, weld surface processing, cutting light-wall tubes and
other small metal objects etc. They are used in engineering industry,
automotive and chemical industry. With the use of proper tools, the
angle grinder can be used not only for cutting or grinding, but also
for rust and paint coats removal.
The areas of its application include repair and construction works,
not only related to metals. The angle grinder can also be used for
cutting and grinding of construction materials, such as brick, paving
stones, ceramic tiles, etc.
The power tool is designed for dry operation only and it must not
be used for polishing. The power tool should be used according
to its purpose.
Use inconsistent with its purpose
• Do not work materials that contain asbestos. Asbestos is
carcinogenic.
• Do not work materials, whose dust is inammable or explosive.
During operation, the power tool produces sparks, which may ignite
emitted vapours.
• Do not use cut-o wheels for grinding. The cut-o wheels are
used to cut with its face, while grinding with lateral surface of such
a cut-o wheel threatens with its damages and puts the operate in
danger of injuries.
DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic
pages of this instruction manual.
1. Spindle lock button
2. Switch
3. Additional handle
4. Grinding wheel cover
5. External ange
6. Internal ange
8. Speed control dial
10. Lever (grinding disc guard)
* There can be dierences between the drawing and actual product.
DESCRIPTION OF USED GRAPHIC SIGNS
NOTE
Содержание
- Instrukcja oryginalna obsługi szlifierka kątowa 59g175 6
- Szczegółowe przepisy bezpieczeństwa 6
- Praca ustawienia 8
- Przygotowanie do pracy 8
- Obsługa i konserwacja 9
- Parametry techniczne 9
- Deklaracja zgodności we ec declaration of conformity megfelelőségi nyilatkozat ek es vyhlásenie o zhode 10
- Gwarancja i serwis 10
- Ochrona środowiska 10
- Angle grinder 59g175 11
- Detailed safety regulations 11
- Translation of the original instructions 11
- Operation adjustments 13
- Preparation for work 13
- Environmental protection 14
- Operation and maintenance 14
- Specifications 14
- Detaillierte sicherheitsvorschriften 15
- Übersetzung der originalbetriebsanleitung winkelschleifer 59g175 15
- Vorbereitung auf den einsatz 17
- Bedienung und wartung 18
- Betrieb einstellungen 18
- Technische parameter 19
- Umweltschutz 19
- Машина шлифовальная угловая 19
- Перевод оригинальной инструкции 19
- Частные требования по безопасности 19
- Подготовка к работе 22
- Работа настройка 23
- Техническое обслуживание 23
- Информация о дате изготовления 24
- Который находится на изделии 24
- Машина шліфувальна кутова болгарка 59g175 24
- Охорона середовища 24
- Переклад інструкції з оригіналу 24
- Під час користування устаткуванням 24
- Спеціальні правила техніки безпеки 24
- Технические характеристики 24
- Указана в серийном номере 24
- Порядок роботи робочі налаштування 27
- Підготовка до роботи 27
- Зберігання та обслуговування 28
- Eredeti használati utasítás fordítása 29
- Részletes biztonsági előírások 29
- Sarokcsiszoló 59g175 29
- Охорона середовища 29
- Технічні характеристики 29
- Felkészítés az üzembehelyezésre 32
- Munkavégzés beállítások 32
- Kezelése és karbantartása 33
- Környezetvédelem 33
- Műszaki jellemzők 33
- Polizor unghiular 59g175 34
- Reguli de siguranță detaliate 34
- Traducere a instrucțiunilor originale 34
- Lucrul asamblarea 36
- Pregătirea pentru lucru 36
- Deservirea întreţinerea 37
- Parametrii tehnici 37
- Podrobné bezpečnostní pokyny 38
- Protecţia mediului 38
- Překlad původního návodu k používání 38
- Úhlová bruska 59g175 38
- Provoz nastavení 40
- Příprava k práci 40
- Péče a údržba 41
- Technické parametry 41
- Detailné bezpečnostné predpisy 42
- Ochrana životního prostředí 42
- Preklad pôvodného návodu na použitie uhlová brúska 59g175 42
- Pred uvedením do prevádzky 44
- Ošetrovanie a údržba 45
- Práca nastavenia 45
- Kotni brusilnik 59g175 46
- Ochrana životného prostredia 46
- Prevod izvirnih navodil 46
- Specifični varnostni predpisi 46
- Technické parametre 46
- Priprava na uporabo 48
- Uporaba nastavitve 49
- Vzdrževanje in hramba 49
- Detalios darbo saugos taisyklės 50
- Kampinis šlifuoklis 59g175 50
- Originalios instrukcijos vertimas 50
- Tehnični parametri 50
- Varovanje okolja 50
- Pasiruošimas darbui 52
- Aptarnavimas ir priežiūra 53
- Darbas ir reguliavimas 53
- Aplinkos apsauga 54
- Instrukciju tulkojums no oriģinālvalodas 54
- Leņķa slīpmašīna 59g175 54
- Speciālie drošības noteikumi 54
- Techniniai duomenys 54
- Sagatavošanās darbam 56
- Apkalpošana un apkope 57
- Darbs iestatījumi 57
- Algupärase kasutusjuhendi tõlge 58
- Eriohutusjuhised 58
- Nurklihvija 59g175 58
- Tehniskie parametri 58
- Vides aizsardzība 58
- Ettevalmistus tööks 60
- Hooldus ja hoidmine 61
- Tehnilised parameetrid 61
- Töö seadistamine 61
- Keskkonnakaitse 62
- Подробни правила за безопасност 62
- Превод на оригиналната инструкция 62
- Ъглова шлайфмашина 59g175 62
- Подготовка за работа 65
- Работа настройки 65
- Обслужване и поддръжка 66
- Технически параметри 66
- Kutna brusilica 59g175 67
- Posebni propisi o sigurnosti 67
- Prijevod originalnih uputa 67
- Опазване на околната среда 67
- Priprema za rad 69
- Rad postavke 70
- Rukovanje i održavanje 70
- Tehnički parametri 70
- Opšte mere bezbednosti 71
- Prevod orginalnog uputstva 71
- Ugaona brusilica 59g175 71
- Zaštita okoliša 71
- Priprema za rad 73
- Korišćenje i održavanje 74
- Rad postavke 74
- Tehničke karakteristike 75
- Zaštita sredine 75
- Γωνιακο τριβειο 59g175 75
- Ειδικεσ απαιτησεισ ασφαλειασ 75
- Μεταφραση τόυ πρωτότυπόυ των όδηγιων χρησησ 75
- Πρόετόιμασια για εργασια 78
- Λειτόυργια ρυθμιση 79
- Τεχνικη συντηρηση 79
- Amoladora angular 59g175 80
- Normas de seguridad detalladas 80
- Traducción del manual original 80
- Πρόστασια περιβαλλόντόσ 80
- Τεχνικα χαρακτηριστικα 80
- Preparación para trabajar 83
- Trabajo ajustes 83
- Parametros técnicos 84
- Protección medioambiental 84
- Uso y mantenimiento 84
- Norme particolari di sicurezza 85
- Smerigliatrice angolare 59g175 85
- Traduzione delle istruzioni originali 85
- Preparazione al funzionamento 87
- Funzionamento regolazione 88
- Servizio e manutenzione 88
- Gedetailleerde 89
- Haakse slijper 59g175 89
- Parametri tecnici 89
- Protezione dell ambiente 89
- Veiligheidsvoorschriften 89
- Vertaling van originele gebruiksaanwijzing 89
- Werk instellingen 92
- Werkvoorbereiding 92
- Bediening en onderhoud 93
- Milieubescherming 93
- Technische parameters 93
- Règles de sécurité détaillées 94
- Traduction de la notice d emploi originale meuleuse d angle 59g175 94
- Preparation au travail 96
- Travail réglages 96
- Entretien et conservation 97
- Paramètres techniques 98
- Protection de l environnement 98
Похожие устройства
- GRAPHITE 59G187 Инструкция по эксплуатации
- GRAPHITE 59G348 Инструкция по эксплуатации
- GRAPHITE 59G088 Инструкция по эксплуатации
- BQ MG1010 Инструкция по эксплуатации
- BQ MG1009 Инструкция по эксплуатации
- BQ MG1007 Инструкция по эксплуатации
- BQ MG2004 Инструкция по эксплуатации
- BQ MG2005 Инструкция по эксплуатации
- BQ MG2003 Инструкция по эксплуатации
- BQ MG2002 Инструкция по эксплуатации
- BQ MG2000 Инструкция по эксплуатации
- BQ MG2001 Инструкция по эксплуатации
- BQ J1006 Инструкция по эксплуатации
- BQ J1007 Инструкция по эксплуатации
- BQ J3000 Инструкция по эксплуатации
- BQ J2002 Инструкция по эксплуатации
- BQ J2001 Инструкция по эксплуатации
- BQ SB1009 Инструкция по эксплуатации
- BQ HB1031SS Инструкция по эксплуатации
- BQ HB1032SS Инструкция по эксплуатации