Kawasaki GPX250R (1987) [140/248] 8 wheels tires
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki GPX250R (1987) [140/248] 8 wheels tires

Kawasaki GPX250R (1987) [140/248] 8 wheels tires

Содержание

Похожие устройства

9 8 WHEELS TIRES Lubricate the tire beads and rim flanges on both sides with a soap and water solution or rubber lubricant This helps the tire beads slip off the rim flanges NOTE oFor easier removal always position the tire bead opposite the valve stem in the rim well and pry the tire bead a little at a time CAUTION I Never lubricate with mineral oil engine oil or gasoline because they will cause deterioration of the tire Break the beads away from both sides of the rim with the bead breaker special tool CAUTION Be careful not to scratch the inner liner and air sealing surfaces of the rim and tire with the tire irons A scratched inner liner or sealing surface may allow air to leak Tire Beads Brake Air Sealing Surfaces WO x 4 MS 1 Bead Breaker 57001 1072 Install the rim protectors special tools around the valve stem Lubricate the tire irons and rim protectors with a soap and water solution or rubber lubricant Step on the side of the tire opposite the valve stem and start prying the tire off the rim near the valve stem with tire irons special tools I r X K Tire Removal 1 Air Sealing Surfaces 2 Inner Liner After removing the bead on one side remove the other bead from the same side Remove the rim from the tire Remove the rim protectors from the rim Tire Installation Inspect the rim and tire and replace them if necessary Clean the scaling surfaces of the rim and tire and smooth the sealing surfaces of the rim with a fine emery cloth If necessary Remove the air valve and discard it CAUTION 1 Rim Protectors 57001 1063 2 Tire Irons 57001 1073 Replace the air valve whenever the tire is replaced ODo not reuse the air valve

Скачать