Kawasaki GPX250R (1987) [178/248] 8 suspension
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Kawasaki GPX250R (1987) [178/248] 8 suspension

Kawasaki NINJA EX250R (1987) [178/248] 8 suspension

Содержание

Похожие устройства

12 8 SUSPENSION Remove the rear caliper see Rear Caliper Removal in Brakes chapter Remove the rear wheel sec Rear Wheel Removal in Whecls Tires chapter Remove the swing arm pivot nut Do not remove the pivot shaft Tighten the tie rod upper nut to the specified torque see Exploded View oTighten the torque link nut to the specified torque see Exploded View in Brake chapter Adjust the drive chain after installation see Drive Chain Slack Adjustment in Final Drive chapter Swing Arm Sleeve Inspection lf there is visible damage replace the sleeve and needle bearing as a set Swing Arm Needle Bearing Inspection A Pivot Nut B Pivot Shaft Remove the lower shock absorber nut Do not remove the bolt Remove the uni t rak tie rod upper nut Do not remove thp hnlt The rollers in the needle bearings wear so little that the wear is difficult to measure Instead inspect the needle bearings for abrasion color change or other damage lf there is any doubt as to the condition of either needle bearing replace the bearing and sleeve as a set Swing Arm Needle Bearing Lubrication In order for the swing arm to function safely and wear slowly it should be lubricated in accordance with the Periodic Maintenance Chart or whenever disas sembled Disassemble the swing arm Using a high flash point solvent wash the sleeves and needle bearings and dry them Inspect the needle bearings sleeves and grease seals for abrasion color change or other damage Apply a molybdenum disulfide grease to the outer circumference of the sleeves and pack the needle bearings with the same grease Tie Rod Rocker Arm Tie Rod Removal Put the motorcycle on its center stand Remove the tie rod lower bolt A Rear Shock Absorber C Lower Bolt B Tie Rod Upper Bolt Remove the tie rod bolt shock absorber bolt and swing arm pivot shaft while supporting the swing arm Remove the swing arm toward the rear Swing Arm Installation Notes When installing the swing arm be careful of the following items Tighten the swing arm pivot nut to he specified torque see Exploded View Tighten the lower shock absorber nut to the specified torque see Exploded View A Tie rod Upper Bolt B Tie rods C Tie rod Lower Bolt D Rear Shock Absorber

Скачать