Moxa EDS-82810G [24/113] System file update by remote tftp

EDS-828 Series Featured Functions

3-11

Configuration IEEE 1588/PTP

Setting Description Factory Default

Clock Mode Support software-based IEEE 1588(PTP) mode Disable

Sync Interval Period for sending synchronization message (in seconds) Disable

Sub-domain Name Support _DFLT(Default) domain only _DFLT

Status

Setting Description Factory Default

Offset To Master (nsec)

Deviation between local time and the reference clock (in

nanoseconds).

Grandmaster UUID When the clock has a port in PTP_SLAVE state, this member’s

value is the value of the grand master clock's Uuid field of the

last Sync message received from the parent of the slave port.

Parent UUID When the clock has a port in PTP_SLAVE state, this member’s

value is the value of the source-Uuid field of the last Sync

message received from the parent of the slave port.

Clock Stratum The stratum number describes one measure of the quality of a

clock. Each clock is characterized by a stratum number used by

the best master clock algorithm as one parameter of clock

quality.

Clock Identifier Properties of the clock. DFLT

PTP Port Settings

Setting Description Factory Default

Port Enable Enable or disable PTP port operation. None

Port Status Display PTP port real status. PTP_DISABLED

System File Update—By Remote TFTP

The EDS-828 supports saving your configuration file to a remote TFTP server or local host to allow other

EDS-828 switches to use the same configuration at a later time, or saving the Log file for future reference.

Loading pre-saved firmware or a configuration file from the TFTP server or local host is also supported for easy

upgrading or configuration of the EDS-828.

TFTP Server IP/Name

Setting Description Factory Default

IP Address of TFTP

Server

The IP or name of the remote TFTP server. Must be set up

before downloading or uploading files.

None