Moxa EDS-82810G [96/113] Using https ssl

EDS-828 Series Featured Functions

3-83

NOTE

The following events will be recorded into the EDS

-828’s Event Log table, and will then be

sent to the specified

Syslog Server:

1. Cold start

2. Warm start

3. Configuration change activated

4. Power 1/2 transition (Off ( On), Power 1/2 transition (On ( Off)

5. Authentication fail

6. Topology changed

7. Master setting is mismatched

8. DI 1/2 transition (Off ( On), DI 1/2 transition (On ( Off)

9. Port traffic overload

10. dot1x Auth Fail

11. Port link off / on

Using HTTPS/SSL

To secure your HTTP access, the EDS-828 supports HTTPS/SSL to encrypt all HTTP traffic. Perform the

following steps to access the EDS-828’s web browser interface via HTTPS/SSL.

1. Open Internet Explorer and type https://EDS-828’s IP address in the address field. Press Enter to establish

the connection.

2. Warning messages will pop out to warn the user that the security certificate was issued by a company they

have not chosen to trust.

3. Select Yes to enter the EDS-828’s web browser interface and access the web browser interface secured via

HTTPS/SSL.