Philips HD6123 [9/148] English

4 When the preset time has elapsed, you will hear an audible signal.After 10 seconds the

audible signal will be repeated.You can stop the audible signal by pressing the timer button.

Removing the timer

The timer is removable, which allows you to take the timer with you to another room. In this way

you will be able to hear the audible signal which indicates that the fried food is ready wherever you

are.

◗ After you have set the required frying time, you can remove the timer from the fryer by

pulling the right side towards you (fig. 11).

- Wait until the oil or fat has cooled down sufficiently.

- Remove the lid.

- Remove the water tray and empty it into the sink.

After frying

1 Lift the handle to raise the basket to its highest position, i.e. the draining position (fig. 12).

2 Open the lid by pressing the lid release lever (fig. 13).

Beware of the hot steam and possible spattering of the oil.

3 Carefully remove the basket from the fryer.

If necessary, shake the basket over the fryer to remove excess oil or fat. Put the fried food in a bowl

or colander containing grease-absorbing paper, e.g. kitchen paper.

If you do not use the fryer regularly, we advise you to remove the oil or liquid fat and to store it in

well-closed containers, preferably in the refrigerator or in a cool place. Fill the containers by pouring

the oil or fat through a fine sieve to remove food particles. Remove the frying basket before emptying

the inner bowl.

B

If the fryer contains solid fat, let the fat solidify in the fryer and store the fryer with the fat still in it

(see chapter 'Preparing for use', section 'Oil and fat').

Cleaning

Wait until the oil or fat has cooled down sufficiently.

Do not use any abrasive (liquid) cleaning agents or materials (e.g scouring pads) to clean the