Honda CBR600F4I (2001-2003) [165/492] Fuel flow inspection

Содержание

Похожие устройства

FUEL SYSTEM Programmed Fuel Injection FUEL FLOW INSPECTION Remove the rear cowl page 2 2 Support the front end of fuel tank page 3 4 Disconnect the fuel cut off relay connector Jump the Brown and Black White wire terminals of the wire harness side using a jumper wire When the fuel return hose is disconnected gasoline may spill out from the hose Place a approved gasoline container under the hose and drain the gasoline Wipe off any spilled out gasoline Disconnect the fuel return hose at the fuel tank and plug the fuel tank inlet joint Turn the ignition switch to ON for 10 seconds Measure the amount of fuel flow Amount of fuel flow Minimum 188 cm3 6 4 US oz 6 6 Imp oz for 10 seconds at 12 V If the fuel flow is less than specified inspect the fol lowing Pinched or clogged fuel hose and fuel return hose Clogged fuel filter Pressure regulator Fuel pump page 5 53 After inspection connect the fuel return hose Start the engine and check for leak 5 52

Скачать