D-Link DGS-3700-12G [133/338] Ggregation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

D-Link DGS-3700-12G [133/338] Ggregation

D-Link DGS-3700-12G [133/338] Ggregation
DGS-3312SR Layer 3 Gigabit Switch
127
16
LINK AGGREGATION COMMANDS
The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create
link_aggregation
group_id <value 1-6> {type [lacp | static]}
delete
link_aggregation
group_id <value 1-6>
config
link_aggregation
group_id <value 1-6> {master_port <port> | ports <portlist> state
[enable | disable]}
config
link_aggregation
algorithm
[mac_source | mac_destination | mac_source_dest | ip_source |
ip_destination | ip_source_dest]
show link_aggregation {group_id <value 1-6> | algorithm}
config lacp_port <portlist> mode [active | passive]
show lacp_port {<portlist>}
Each command is listed, in detail, in the following sections.
NOTE: As a stand-alone switch or as a master switch in a switch stack,
the switch number will be referred to as 15 for all configurations, graphs
and tables.
create link_aggregation
Purpose Used to create a link aggregation group on the switch.
Syntax
create link_aggregation group_id <value 1-6> {type [lacp |
static]}
Description This command will create a link aggregation group with a unique
identifier.
Parameters
<value 1-6> − Specifies the group ID. The switch allows up to 6
link aggregation groups to be configured. The group number
identifies each of the groups.
type – Specify the type of link aggregation used for the group. If
the type is not specified the default type is static.
lacp – This designates the port group as LACP compliant.
LACP allows dynamic adjustment to the aggregated port
group. LACP compliant ports may be further configured (see
config lacp_ports). LACP compliant must be connected to
LACP compliant devices.

Содержание

Похожие устройства

Скачать