D-Link DGS-3700-12G [26/338] Config serial_port

DGS-3312SR Layer 3 Gigabit Switch

config serial_port

Purpose

Used to configure the serial port.

Syntax config serial_port {baud_rate [9600 | 19200 | 38400 | 115200]

15_minutes]}

Description

This command is used to configure the serial port’s baud rate

and auto logout settings.

Parameters

baud_rate [9600 | 19200 | 38400 | 115200] − The serial bit rate

that will be used to communicate with the management host.

auto logout – This parameter will set the time that the switch will

wait before logging out automatically, if left idle. The choices that

accompany this parameter are:

 never − No time limit on the length of time the console

can be open with no user input.

 2_minutes − The console will log out the current user if

there is no user input for 2 minutes.

 5_minutes − The console will log out the current user if

there is no user input for 5 minutes.

 10_minutes − The console will log out the current user if

there is no user input for 10 minutes.

 15_minutes − The console will log out the current user if

there is no user input for 15 minutes.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To configure baud rate:

DGS-3312SR:4#config serial_port baud_rate 9600

Command: config serial_port baud_rate 9600

Success.

DGS-3312SR:4#

enable clipaging

Purpose

Used to pause the scrolling of the console screen when the show

command displays more than one page.

Syntax enable clipaging

Description

This command is used when issuing the show command which

causes the console screen to rapidly scroll through several

pages. This command will cause the console to pause at the end