D-Link DGS-3700-12G [53/338] Create snmp host

DGS-3312SR Layer 3 Gigabit Switch

create snmp host

 Message integrity − Ensures that packets have not been

tampered with during transit.

 Authentication − Determines if an SNMP message is from

a valid source.

 Encryption − Scrambles the contents of messages to

prevent it being viewed by an unauthorized source.

noauth_nopriv − Specifies that there will be no authorization and

no encryption of packets sent between the switch and a remote

SNMP manager.

auth_nopriv − Specifies that authorization will be required, but

there will be no encryption of packets sent between the switch

and a remote SNMP manager.

auth_priv − Specifies that authorization will be required, and that

packets sent between the switch and a remote SNMP manger will

be encrypted.

<auth_sting 32> − An alphanumeric string used to authorize a

remote SNMP manager to access the switch’s SNMP agent.

Restrictions Only administrator-level users can issue this command.

Example usage:

To create an SNMP host to receive SNMP messages:

DGS-3312SR:4#create snmp host 10.48.74.100 v3 auth_priv public

Command: create snmp host 10.48.74.100 v3 auth_priv public

Success.

DGS-3312SR:4#

delete snmp host

Purpose Used to remove a recipient of SNMP traps generated by the

switch’s SNMP agent.

Syntax

delete snmp host <ipaddr>

Description

The delete snmp host command deletes a recipient of SNMP

traps generated by the switch’s SNMP agent.

Parameters

<ipaddr> − The IP address of a remote SNMP manager that will

receive SNMP traps generated by the switch’s SNMP agent.

Restrictions Only administrator-level users can issue this command.