D-Link DGS-3700-12G [279/338] Config route redistribute dst rip src

DGS-3312SR Layer 3 Gigabit Switch

273

config route redistribute dst rip src

accomplished by comparing the routes stored in the various

router’s routing tables and assigning appropriate metrics. This

information is then exchanged among the various routers

according to the individual routers current routing protocol. The

switch can redistribute routing information between the OSPF and

RIP routing protocols to all routers on the network that are running

OSPF or RIP. Routing information entered into the Static Routing

Table on the local switch is also redistributed.

Parameters

src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2} −

Allows the selection of the protocol of the source device.

metric <value> − Allows the entry of an OSPF interface cost. This

is analogous to a Hop Count in the RIP routing protocol.

Restrictions Only administrator-level users can issue this command.

Example Usage:

To configure route redistributions:

DGS-3312SR:4#config route redistribute dst ospf src rip mettype

type_1 metric 2

Command: config route redistribute dst ospf src rip mettype

type_1 metric 2

Success.

DGS-3312SR:4#

delete route redistribute

Purpose Used to delete an existing route redistribute configuration on the

switch.

Syntax

delete route redistribute {dst [rip | ospf] src [rip | static | local

| ospf]}

Description This command will delete the route redistribution settings on this

switch.

Parameters

dst [rip | ospf] − Allows the selection of the protocol on the

destination device.

src [rip | static | local | ospf] − Allows the selection of the protocol

on the source device.

Restrictions Only administrator-level users can issue this command.

Example Usage:

To delete route redistribution settings: