D-Link DGS-3700-12G [142/338] Config ipif

DGS-3312SR Layer 3 Gigabit Switch

136

config ipif

Syntax

config ipif <ipif_name 12> [{ipaddress <network_address> |

{vlan <vlan_name 32> | state [enable | disable]} | bootp |

dhcp]

Description This command is used to configure the System IP interface on the

switch.

Parameters

<ipif_name 12> − The name for the IP interface previously

created, that is to be configured.

ipaddress <network_address> − IP address and netmask of the IP

interface to be configured. You can specify the address and mask

information using the traditional format (for example,

10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).

vlan <vlan_name 32> − The name of the VLAN corresponding to

the System IP interface.

state [enable | disable] − Allows you to enable or disable the IP

interface.

bootp − Allows the selection of the BOOTP protocol for the

assignment of an IP address to the switch’s System IP interface.

dhcp − Allows the selection of the DHCP protocol for the

assignment of an IP address to the switch’s System IP interface.

Restrictions Only administrator-level users can issue this command.

Example usage:

To configure the IP interface System:

DGS-3312SR:4#config ipif System ipaddress 10.48.74.122/8

Command: config ipif System ipaddress 10.48.74.122/8

Success.

DGS-3312SR:4#

show ipif

Purpose Used to display the configuration of an IP interface on the switch.

Syntax

show ipif <ipif_name 12>

Description This command will display the configuration of an IP interface on

the switch.

Parameters

<ipif_name 12> − The name created for the IP interface to view.

Restrictions None.