D-Link DGS-3700-12G [276/338] Create route redistribute dst rip src

DGS-3312SR Layer 3 Gigabit Switch

270

Route Source Metric Metric Type

RIP 0 to 16777214 mettype 1

mettype 2

Static 0 to 16777214 mettype 1

mettype 2

Local 0 to 16777214 mettype 1

mettype 2

Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the

metric 20.

Example Usage:

To add route redistribution settings:

DGS-3312SR:4#create route redistribute dst ospf src rip

Command: create route redistribute dst ospf src rip

Success.

DGS-3312SR:4#

create route redistribute dst rip src

Purpose Used to add route redistribution settings for the exchange of OSPF

routes to RIP routes on the switch.

Syntax

create route redistribute dst rip src {all | internal | external |

type_1 | type_2 | inter+e1 | inter+e2}] {metric <value>}

Description This command will redistribute routing information between the

OSPF and RIP routing protocols to all routers on the network that

are running OSPF or RIP. Routing information entered into the

Static Routing Table on the local DGS-3312SR switch is also

redistributed

Parameters

src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2} −

Allows the selection of the protocol of the source device.

metric <value> − Allows the entry of an OSPF interface cost. This is

analogous to a HOP Count in the RIP routing protocol.

Restrictions Only administrator-level users can issue this command.

Routing information source − OSPF and the Static Route table. Routing information will be redistributed to RIP. The following

table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.