D-Link DGS-3700-12G [179/338] Create authen server_host

DGS-3312SR Layer 3 Gigabit Switch

173

Example usage:

To display the login and enable method list for all applications on the switch:

DGS-3312SR:4#show authen application

Command: show authen application

Application Login Method List Enable Method List

---------------- ------------------ ------------------------

Console default default

Telnet Trinity default

SSH default default

HTTP default default

DGS-3312SR:4#

create authen server_host

Purpose Used to create an authentication server host.

Syntax

create authen server_host <ipaddr> protocol [tacacs | xtacacs

| tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> |

none] | timeout <int 1-255> | retransmit <1-255>}

Description This command will create an authentication server host for the

TACACS/XTACACS/TACACS+/RADIUS security protocols on the

switch. When a user attempts to access the switch with

authentication protocol enabled, the switch will send authentication

packets to a remote TACACS/XTACACS/TACACS+/RADIUS

server host on a remote host. The

TACACS/XTACACS/TACACS+/RADIUS server host will then verify

or deny the request and return the appropriate message to the

switch. More than one authentication protocol can be run on the

same physical server host but, remember that

TACACS/XTACACS/TACACS+/RADIUS are separate entities and

are not compatible with each other. The maximum supported

number of server hosts is 16.

Parameters server_host <ipaddr> - The IP address of the remote server host

the user wishes to add.

protocol – The protocol used by the server host. The user may

choose one of the following:

 tacacs – Enter this parameter if the server host utilizes the

TACACS protocol.

 xtacacs - Enter this parameter if the server host utilizes the

XTACACS protocol.

 tacacs+ - Enter this parameter if the server host utilizes

the TACACS+ protocol.