D-Link DGS-3700-12G Инструкция по эксплуатации онлайн [31/338] 40588

DGS-3312SR Layer 3 Gigabit Switch

reset

Purpose

Used to reset the switch to the factory default settings.

Syntax reset {[config | system]}

Description

This command is used to restore the switch’s configuration to the

default settings assigned from the factory.

Parameters

config − If the keyword ‘config’ is specified, all of the factory

default settings are restored on the switch including the IP

address, user accounts, and the switch history log. The switch will

not save or reboot.

system − If the keyword ‘system’ is specified all of the factory

default settings are restored on the switch. The switch will save

and reboot after the settings are changed to default. Rebooting

will clear all entries in the Forwarding Data Base.

If no parameter is specified, the switch’s current IP address, user

accounts, and the switch history log are not changed. All other

parameters are restored to the factory default settings. The switch

will not save or reboot.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To restore all of the switch’s parameters to their default values:

DGS-3312SR:4#reset config

Command: reset config

Success.

DGS-3312SR:4#

Purpose

Used to log in a user to the switch’s console.

Syntax login

Description

This command is used to initiate the login procedure. The user

will be prompted for his Username and Password.

Parameters

None.

Restrictions

None.

Example usage:

To initiate the login procedure: