АМАТЕК AN-SGM28P24-400 Руководство по интерфейсу командной строки CLI онлайн [138/322] 598614

137 / 322

Switch(config-ge1/1)#interface ge1/2

Switch(config-ge1/2)#switchport mode trunk

Switch(config-ge1/2)#switchport trunk allowed vlan add 1,2

Switch(config-ge1/2)#exit

Switch(config)#exit

Switch#show vlan

VLAN Name State Member ports ([u]-Untagged, [t]-Tagged)

---- -------- --------- ---------------------------------------------------

1 vlan1 active [t]ge1/1 [t]ge1/2 [u]ge1/3 [u]ge1/4 [u]ge1/5

[u]ge1/6 [u]ge1/7 [u]ge1/8 [u]ge1/9 [u]ge1/10

[u]ge1/11 [u]ge1/12

2 vlan2 active [t]ge1/1 [t]ge1/2

Switch#configure terminal

#Create a EAPS Domain ring 1

Switch(config)#eaps create 1

#Configure VLAN 2 to control VLAN

Switch(config)#eaps control-vlan 1 2

#Configuring VLAN 1 to be protected VLAN

Switch(config)#eaps protected-vlan 1 1

#Configure switch3 to be a transit node

Switch(config)#eaps mode 1 transit

#Configure ge1/1 to primary-port

Switch(config)#eaps primary-port 1 ge1/1

#Configure ge1/2 to secondary -port

Switch(config)#eaps secondary-port 1 ge1/2

#Start EAPS Domain ring 1

Switch(config)#eaps enable 1