АМАТЕК AN-SGM28P24-400 [188/322] Configuring radius roaming function

187 / 322

11.4.6 Configuring RADIUS roaming function

When MAC, IP or VLAN binding is made to the client, when the client is moved to other

places, the binding client can not carry out 802.1x authentication because of the MAC address, IP

address or VLAN change. Open the radius roaming function, will ignore the client's MAC, IP or

VLAN binding, so as to continue to achieve 802.1x authentication。

The following command configures the RADIUS roaming function in the global CONFIG

mode：

Switch(config)#radius-server roam

The following command closes the RADIUS roaming function in global CONFIG mode：

Switch(config)#no radius-server roam

11.4.7 Display RADIUS information

The following command displays RADIUS configuration information in normal mode /

privilege mode：

Switch#show radius-server

11.5 Configuration example

Open the 802.1x protocol, configure the port ge1/1 is Auto state, configure the main

authentication server is 198.168.80.111, configure the switch shared secret key is ABCDEF。

Switch#

Switch# dot1x

Switch#config t

Switch(config)#radius-server host 198.168.80.111

Switch(config)#radius-server key abcdef

Switch(config)# interface ge1/1

Switch(config-ge1/1)# dot1x control auto