АМАТЕК AN-SGM28P24-400 [37/322] Configure the host name of the system

36 / 322

 Telnet client

 UDLD configuration

2.2.1 Configure the host name of the system

The host name of the system is used to identify the switch, which facilitates the user to

distinguish between different switches, while the host name of the system is part of the CLI

prompt of the terminal。The host name of the system defaults to Switch。

The commands of the host name of the system are as follows：

command

describe

CLI mode

hostname <name>

Set the host name of the

system。

Global

configuration mode

no hostname

Clear the host name of the

system, that is, the hostname

returns to the default value

Switch

。

Global

configuration mode

show running-config

Viewing the current

configuration of the system,

you can see the configuration

of the host name of the

system

。

Privileged mode

2.2.2 Configuring the system clock

The switch provides the function of real time clock, the current clock can be set by the

command, and the current clock can also be viewed。The system clock is powered by the internal,

so that the real time clock can be operated continuously when the system is powered off, and the

system does not need to reset the clock after starting。

The switch has been set up in the factory clock, the user does not need to set again, if the user

found that the time is not allowed, the user can reset the clock。

The related commands of the system clock are as follows：