АМАТЕК AN-SGM28P24-400 [56/322] Dlf suppression configuration

55 / 322

3.3.4 DLF suppression configuration

The following command configures the DLF suppression of this port in the interface

configuration mode：

storm-control dlf

The following command cancels the DLF suppression configuration of this port in the

interface configuration mode：

no storm-control dlf

3.3.5 Inhibition rate configuration

The following command configures the inhibit rate of this port in the interface configuration

mode：

storm-control ratelimit { broadcast | dlf | multicast } <1- 1048575 >

3.3.6 Display STORM-CONTROL configuration

The following command displays the STORM-CONTROL configuration in normal mode or

privileged mode：

show storm-control

3.4 Configuring STORM-CONSTRAIN

Port traffic threshold control is used to control message storm on ethernet. The ports that

enable this function detect the unicast traffic, multicast traffic and broadcast message traffic at the

destination port at regular intervals。If a class of message traffic exceeds a preset upper limit

threshold, the user can configure to determine whether to block the port or to shut the port, and

whether to send Trap and Log information。

When a certain type of message traffic exceeds the upper limit specified by the message, the

system provides two processing methods：