АМАТЕК AN-SGM28P24-400 [184/322] 1 configure whether to check the client version

183 / 322

Switch(config-ge1/1)dot1x transmit-port

The following command sets port ge1/1 as non transport port in the interface configuration

mode：

Switch(config-ge1/1)no dot1x transmit-port

11.3.10 Configuring the 802.1x client version number

Configure the version number of the 802.1x client, and only the client whose version is not

less than the version number of the configuration can be authenticated, otherwise the

authentication fails. The default client version number of the switch is 2。

The following command configures the client version number in global CONFIG mode：

Switch(config)# dot1x client-version <string>

11.3.11 Configure whether to check the client version

number

Configure whether to check the version number of the 802.1x client. If configured to check,

the switch first checks the client version number when authenticating. The default is configured to

check。

The following command configures the global CONFIG mode to open the check of the client

version number：

Switch(config)# dot1x check-version open

11.3.12 Configuration authentication method

The authentication method of configuration switch to 802.1x packet, the client initiated

authentication method is divided into universal authentication and extended authentication, the

switch can be configured as the first to which way authentication. If the client initiated