АМАТЕК AN-SGM28P24-400 [61/322] Cancellation of port transmit or receive

60 / 322

3.6.1 Default configuration

The switch supports sending and receiving bandwidth to each port, respectively. The default

port does not perform bandwidth control。

3.6.2 Set port send or receive bandwidth control

The following command sets the port to send or receive bandwidth control in the interface

configuration mode：

portrate {egress | ingress} <rate>

Egress represents bandwidth control over packets sent。

Ingress represents bandwidth control of the received packets。

<rate> said to set the bandwidth value range is 11024000, unit is kbits。

3.6.3 Cancellation of port transmit or receive

bandwidth control

The following command cancels the bandwidth control of the port in the interface

configuration mode：

no portrate {egress | ingress}

Egress represents bandwidth control to cancel sending packets。

Ingress represents the bandwidth control of the cancelled packet。

3.6.4 Bandwidth control of display port configuration

The following command looks at bandwidth control of port configuration in common mode

or privileged mode：

show portrate interface <if-name>

<if-name> is the port name to query bandwidth control information。