АМАТЕК AN-SGM28P24-400 Руководство по интерфейсу командной строки CLI онлайн [272/322] 598614

271 / 322

Configuring member device SwitchC

Because the configuration of the member devices is the same, the configuration on Switch C

is similar to that of Switch A, and the configuration process is slightly better。

Configuration management device SwitchB

# Configuration management VLAN。

[SwitchB] cluster management-vlan 10

[SwitchB] interface ge1/2

[SwitchB-ge1/2] switch trunk vlan 10

[SwitchB] interface ge1/3

[SwitchB-ge1/3] switch trunk vlan 10

# Enabling global NDP and NTDP functions, and enabling ports ge1/2 and ge1/3 on the NDP,

NTDP functions。

[SwitchB] ndp enable

[SwitchB] ntdp enable

[SwitchB] interface ge1/1

[SwitchB-ge1/2] ndp enable

[SwitchB-ge1/2] ntdp enable

[SwitchB] interface ge1/3

[SwitchB-ge1/3] ndp enable

[SwitchB-ge1/3] ntdp enable

# The aging time of the NDP message sent by the device is 200 seconds on the receiving

device。

[SwitchB] ndp timer aging 200

# The time interval for configuring the NDP message is 70 seconds。

[SwitchB] ndp timer hello 70

# The maximum number of hops collected by the configuration topology is 2 hops。

[SwitchB] ntdp hop 2

# Configuring the first port of the collected device to forward the topology, the delay time of

collecting the request packets is 150ms。

[SwitchB] ntdp timer hop-delay 150

# The delay time of collecting request packets of other ports forwarding topology is 15ms。

[SwitchB] ntdp timer port-delay 15

# The configuration topology collects intervals of 3 minutes。

[SwitchB] ntdp timer 3