Home
Главная
Al-Ko
Воздуходувка бензиновая
442
Руководство по эксплуатации Страница: 37

Al-Ko 442 [37/168] Start up

2500043_a 37

Start-up

The two vacuum tubes are now firmly connected

together. They are not intended to be detached

from each other again.

Opening the intake grille of the appliance(06)

1. Hold the appliance (06/1) tight.

2. Firmly slide the screwdriver (06/2) of the

spark plug spanner into the upper lateral

opening (06/3) of the intake grille (06/4).

NOTE

Do not slide the screwdriver into the front

lateral opening to which the arrow (that is

mounted on the vacuum grille) points.

3. Push the inserted screwdriver, together with

the intake grille, away from the appliance.

The intake grille swivels up.

Connecting the upper vacuum tube to the

appliance(07)

1. Hold the swivelled-up intake grille tight.

2. Align the upper vacuum tube (07/1) to the

housing opening (07/2) as follows:

■

The openings (07/3) of the transverse

grooves and the nubs of the housing

opening (07/4) face each other.

■

The vacuum tube is rotated so that the

two arrows (05/3) and (05/4) are at the

top.

3. Slide the upper vacuum tube (07/1) into the

housing opening (07/2) and rotate it firmly

anti-clockwise until it engages.

Connecting the exhaust air manifold to the

appliance connection piece(08)

1. Align the exhaust air manifold (08/1) to the

appliance connection piece (08/2) so that the

spring (08/3) and groove (08/4) face each

other. The two nubs (08/5) of the exhaust air

manifold must point downwards.

2. Slide the exhaust air manifold (08/1) into the

appliance connection piece (08/2) until it

sticks. The locking catch (08/6) does not en-

gage in the appliance connection piece.

Connecting the collecting sack to the exhaust

air manifold(09)

1. Open the hook and loop fastener (09/1) on

the blow-in opening (09/2) of the collecting

sack.

2. Slide the blow-in opening (09/2) of the col-

lecting sack over the blow-out connection

piece (09/3) of the exhaust air manifold until

the hook and loop fastener (09/1) is located

behind the bulge (09/4). The zip fastener and

carrying belt of the collecting sack must point

upwards.

3. Pull the hook and loop fastener (09/1) tight

and close it.

4. Pull on the collecting sack to check that it is

now firmly connected to the blow-out connec-

tion piece (09/3) of the exhaust air manifold.

5. Close the zip fastener of the collecting sack if

it is open.

Attaching the carrying belt to the collecting

sack(10)

1. Click the snap hooks (10/1) of the carrying

belt in the rings (10/2) on the collecting sack.

2. Pick up the appliance and hang the collecting

sack over your left shoulder. Adjust the

length of the carrying belt by moving the

buckle (10/3) so the collecting sack is com-

fortable to carry.

4.4 Dismantling the collecting sack and the

vacuum tubes

Removing the exhaust air manifold from the

appliance connection piece(11)

1. Pull the exhaust air manifold (11/1) out of the

appliance connection piece (11/2).

It is not necessary to separate the exhaust air

manifold from the collecting sack.

Removing the vacuum tube from the housing

opening(12)

1. Turn the vacuum tube (12/1) firmly clockwise

until it disengages and can be taken off. The

intake grille (12/2) folds shut.

2. Push the intake grille (12/2) against the appli-

ance until it engages.

5 START-UP

5.1 Checking the appliance

Check before starting work:

■

Are all protective grilles undamaged? Have

any damaged protective grilles repaired.

■

Are all screws tight? Tighten any loose

screws.

■

Are the upper and lower handles firmly at-

tached to the appliance? Tighten any loose

handles.

■

Are the shredding blade and the rotor under

the vacuum grille undamaged? Have any

damaged appliance parts repaired.

Al-Ko 442 [37/168] Start up

Содержание

Похожие устройства