Oleo-Mac GI44P40V [23/116] Troubleshooting chart

13. TROUBLESHOOTING CHART

WARNING: always stop the machine and disconnect the safety connector before carrying out the corrective

checks recommended in the table below, except when they require the machine to be in operation.

When you have checked all the possible causes listed and you are still experiencing the problem, see your Servicing Dealer. If

you are experiencing a problem that is not listed in this chart, see your Servicing Dealer for service.

PROBLEM POSSIBLE CAUSE SOLUTION

Engine will not start or will run only

a few seconds after starting.

1. Battery drained or ﬁtted incorrectly

2. Power cable damaged.

3. Motor protector triggered due to

engine overheating.

4. Safety plug not inserted

5. Starting lever microswitch damaged

6. Damaged battery

1. Charge the battery or ﬁt it correctly

2. Have the cable replaced by an Authorised

Service Centre.

3. Wait several minutes before restarting the

machine.

4. Check and/or insert

5. Contact an Authorized Service Centre

6. Contact an Authorized Service Centre

Engine starts and runs, but blade is

not rotating

WARNING: Never touch the

blade while the engine is

running.

Switch off the motor immediately and contact

an Authorised Service Centre.

WARNING! Also read the battery and battery charger instruction and maintenance manual!