АМАТЕК AN-SGM28P24-400 Руководство по интерфейсу командной строки CLI онлайн [45/322] 598614

44 / 322

The commands downloaded from the configuration file are as follows：

command

describe

CLI mode

upload configure <ip-address>

<file-name>

Upload the configuration file

to the PC machine, the first

parameter is the IP address of

the PC machine, and the

second parameter is the file

name of the configuration file

stored on the PC machine

。

Privileged mode

download configure

<ip-address> <file-name>

The configuration file is

downloaded to the PC, the first

parameter is the PC's IP

address, the second parameter

is the configuration file stored

on the PC file name

。

Privileged mode

The configuration file is downloaded and used to the TFTP protocol. The TFTP client

software is run on the switch and the TFTP server software is run on the PC server。The operating

steps downloaded from the configuration file are as follows：

First step： Build network environment。

Second steps： Start the TFTP server software on the PC, and set the directory stored in the

configuration file。

Third steps： Save configuration on switch。

Fourth steps： The configuration file upload command is executed on the switch, and the

configuration files are backed up to the PC。

Fifth steps： When the switch needs the configuration file on the PC machine, the

configuration file download command is executed on the switch, and the configuration file on the

PC machine is downloaded to the switch。

Sixth steps：To make the configuration effective, the switch must be restarted。

Sample： A switch that has been configured with VLAN and interface addresses, which

needs to be downloaded on the configuration file。

First step：Build the following network environment。