Stiga AUTOCLIP 140 4WD [77/708] Operation with delayed start

Превью страниц Страница 77 / 708

User’s manual

4. Disconnect the robot from the recharging area (page 26).

5. Position the robot inside the grassy surface in an area where the grass is at least 1 metre (40.0

in.) from any obstacle.

6. Press the OFF/ON key and wait a few seconds for the robot to turn on completely.

7. Press START/STOP key to start the robot.

Once the robot has stopped due to the reasons described in the chapter “Robot Stop”, activate

the safety stop and reposition the robot inside the power supply unit for recharging (see page 26).

Important

For a better cutting performance and correct functioning of the recognition

sensor, do not start the robot in case of rain or in very humid conditions. The

best results are obtained in the middle of the day.

OPERATION WITH DELAYED START

If necessary, the robot can be delayed to start by up to 24 hours.

With the robot in PAUSE mode, brie y press the OFF/ON button at intervals of around 1 second,

with each pressing delaying the start time of the operation by one hour.

On completion of the sequence, wait for the robot to con rm the delay setting with the sound

of a beep.

Press the “START/STOP” button to con rm the procedure. Depending on the model, the Robot

will go in “stand-by” mode or go back to the charging station to wait for the preset departure

time.

If the START/STOP button is not pressed, the robot will go in stand-by anyway until the preset

time.

Important

In case of errors, turn off the robot by keeping the ON/OFF button pressed, and

resume the start-up sequence.

OPERATION WITH

DELAY OPERATION

With the robot in PAUSE mode,

press the ON/OFF

button for each hour of delay

The Robot goes into STAND-BY

or moves towards the charging station

waiting for the preset departure time

Wait

Press START/STOP

e.g. 4 times

4 hours

4 beeps

4 hours