Stiga AUTOCLIP 140 4WD [85/708] Troubleshooting
Макгруп McGrp.ru

Stiga AUTOCLIP 140 4WD [85/708] Troubleshooting

Превью страниц Страница 85 / 708
Stiga AUTOCLIP 140 4WD [85/708] Troubleshooting
39
User’s manual
EN
FAILURES, CAUSES AND REMEDIES
TROUBLESHOOTING
The information below is designed to help identify and correct any faults and/or malfunctions
which may occur during operation.
Some failures can be resolved by the user; others require speci c technical skills or special abi-
lities and therefore must only be resolved by quali ed personnel with certi ed experience gained
in the speci c  eld of intervention.
Problem Cause Remedy
The robot is very noisy
Cutting blade damaged.
Replace the blade with
a new one (see “Blade
Replacement”, page 43).
Cutting blade fouled (tapes,
ropes, plastic fragments,
etc.).
Stop the robot safely (see
“Robot safety stop”, page
34). Use protective gloves
to avoid the risk of injury.
Remove the debris from the
blade.
The robot was started too
close to obstacles (less than
1 m. (40 in.) away) or in the
presence of unexpected
obstacles (fallen branches,
forgotten objects, etc.).
Stop the robot safely (see
“Robot safety stop”, page
34).
Remove the obstacles and
restart the robot.
Electric motor failure
Have the motor repaired
or replaced by the nearest
authorised service centre.
Too high grass.
Increase the cutting height
(see “Cutting height
adjustment” on page 27).
Carry out a preliminary cut-
ting of the area with a normal
lawnmower.

Содержание

2004

Похожие устройства

Google Play RuStore