Stiga AUTOCLIP 140 4WD [83/708] Ordinary maintenance
Макгруп McGrp.ru

Stiga AUTOCLIP 140 4WD [83/708] Ordinary maintenance

Превью страниц Страница 83 / 708
Stiga AUTOCLIP 140 4WD [83/708] Ordinary maintenance
37
User’s manual
EN
OPERATING TIPS
Below are some helpful operating tips when using the robot.
• Even after being suitably informed on the use of the robot, simulate some test manoeuvres
on  rst use to identify the commands and main functions.
• Check and secure the fastening screws of the main components.
• Mow the lawn frequently to avoid excessive growth of the grass.
• Do not use the robot to mow grass which is shorter than 3 cm (1.18 in.) in respect to the
cutting blade.
• If the lawn is equipped with an automatic sprinkler system, make sure the robot  nishes its
work cycle at least one hour before the start of the watering to prevent damage to the robot
itself and to the sprinklers.
• Check the slope of the ground and make sure the maximum values admissible are not excee-
ded so that the use of the robot does not cause dangers.
• When using the robot, make sure the area to mow is clear of people (in particular, children, the
elderly, or disabled people) and domestic animals to prevent safety risks.
To minimize chance of injury, operate the robot during times when the yard is not being used.
• Do not use the robot in case of rain or strong humidity. The best results are obtained in the
middle of the day.
ORDINARY MAINTENANCE
MAINTENANCE RECOMMENDATIONS
Important
• During maintenance operations, use personal protection equipment indicated
by the Manufacturer, especially when working on the blade.
• Before carrying out any maintenance, make sure the robot is turned OFF (see
“Robot Safety Stop”, page 31).
SCHEDULED MAINTENANCE TABLE
Frequency Part Type of maintenance Reference
Weekly
Blade
Clean and check the ef ciency of
the blade
See “Robot
Cleaning”, page 38
Replace the blade if bent due to
an impact or if it is worn out.
See “Blade
replacement”,page 43
Curb drop-off
sensor
Remove any excess grass.
Change the sensors if they are
damaged.
See “Changing
the curb drop-off
sensors” page 44.
Charging knobs
of the robot and
contact plates
of the charging
station.
Clean and remove any oxidations See “Robot Cleaning”
Monthly Robot Clean the robot See “Robot Cleaning”

Содержание

2004

Похожие устройства

Google Play RuStore