Stiga AUTOCLIP 140 4WD [78/708] Starting the robot with the sensors turned off

Превью страниц Страница 78 / 708

User’s manual

STARTING THE ROBOT WITH THE SENSORS TURNED OFF

In certain lawn conditions, the robot can be started with the lawn and curb drop-off sensors

deactivated, which means the robot can be started when lawn conditions are such that correct

functions are not guaranteed, for example with very short or patchy grass.

This mode requires very special attention from the user, and the dealer should be consulted

before attempting to operate in this mode.

When the robot is on Pause, these modes can be activated following this procedure:

Grass Sensor Off – Curb drop-off

sensor On:

Press the START/STOP button and keep it

pressed for 4 seconds until 2 consecutive

beeps are heard and the PAUSE led

 ashes twice. This mode must only be

used on models with the curb drop-off

sensor installed, and it allows working

with just the 4 curb drop-off sensors. This

mode is recommended in gardens where

the lawn is lower than the sensors but still

very uniform.

GULF

With the curb drop-off sensor installed,

minimum width 10 cm /4.0 inches.

GRASS SENSOR OFF

CURB DROP-OFF SENSOR ON

Keep the START button pressed

for 4 seconds.

Release the button

Wait for

2 beeps 2 flashes

4 sec.