![D-Link DRS-200 [9/69] Introduction to eap md5 chap](/img/pdf.png)
D-Link DRS-200 [9/69] Introduction to eap md5 chap
8
802.11 Wi-Fi is the state of the art WLAN today. 802.11 has two physical layer
standards: 802.11b operating at 2.4GHz (and delivering up to 11Mbps at 250 feet max)
and 802.11a operating at 5GHz (and delivering up to 54Mbps at 150 feet max). A third
standard, 802.11g, providing the speeds of 802.11a at the distances of 802.11b, should
be finalized in late 2003. Although most WLANs today are 802.11b, most enterprises
will use 802.11a
Introduction to EAP-TLS
EAP-TLS is based on SSL v3.0. To better understand EAP-TLS operation, this section
focuses on the operation of TLS with respect to SSL. TLS is designed to provide secure
authentication and encryption for a TCP/IP connection.
Introduction to EAP-MD5 CHAP
EAP-Message Digest 5 Challenge Handshake Authentication Protocol (EAP-MD5
CHAP) is a required EAP type that uses the same challenge handshake protocol as
PPP-based CHAP, but the challenges and responses are sent as EAP messages.
EAP-MD5 CHAP is described in RFC 2284.
A typical use for EAP-MD5 CHAP is to authenticate the credentials of remote access
clients by using user name and password security systems. You can also use EAP-MD5
CHAP to test EAP interoperability.
Содержание
- D link drs 200 1
- Manual 1
- Contents 2
- Contents of package 3
- Package contents 3
- System requirements for configuration 3
- Introduction 4
- Capacity 5
- Cf card 5
- Client data 5
- Connections 5
- Drs 200 and all these log files will be lost after power off an 8mb cf card could be 5
- Mb 100 100 200 thousand 5
- Mb 100 100 400 thousand 5
- Mb 100 100 800 thousand 5
- Note system log and radius log won t be saved if you don t have cf card in your 5
- System log and radius log data 5
- Used to save at about 200 thousand records of log data in average this number may 5
- User s authentication data 5
- User s authentication data the drs 200 has the following cf card as described below 5
- Vary depends on the length of each record and 100 records each of client data and 5
- Features benefits 6
- Features benefits continued 7
- Introduction to ieee 802 x 8
- Introduction to radius 8
- Introduction to wlan 8
- Introduction to eap md5 chap 9
- Introduction to eap tls 9
- Introduction to bridge 10
- Introduction to mac authentication 10
- Described below 11
- Led led activity 11
- Led stands for l ight e mitting d iode the drs 200 has the following leds as 11
- Getting started 12
- Other d link express wireless network products right out of the box 12
- With its default settings the drs 200 when activated will connect with 12
- For a typical network setup at home office as shown above please do 13
- The following 13
- Using the network configuration 14
- Using the network configuration 15
- Ip address 16
- Primary setup 16
- Subnet mask 16
- Using the network configuration 16
- Gateway 17
- Please enter the gateway ip you have already setup 17
- Using the network configuration 18
- How to save data and activate drs 200 radius 20
- Two processes for activating drs 200 20
- Using the network configuration 20
- Private 21
- Server configuration 21
- Using the network configuration 21
- Ca file 22
- Certificate file 22
- Private key file 22
- Using the network configuration 22
- Client configuration 23
- Ip address 23
- Using the network configuration 23
- Secret 24
- Short name 24
- All settings of wireless access points will show in this client list you can click the 25
- Client list 25
- Delete button to delete existed setting in configure column 25
- Using the network configuration 25
- Type select authentication 26
- User configuration 26
- Using the network configuration 26
- Authentication type 27
- Password 28
- User name 28
- Using the network configuration 28
- Mac address 29
- Password 29
- Using the network configuration 29
- User name 30
- Using the network configuration 30
- User list 31
- Using the network configuration 31
- Snmp disable 32
- Snmp enable 32
- Using the network configuration 32
- Advanced feature 33
- Export system 33
- Setting to client 33
- Using the network configuration 33
- Client 34
- Default 34
- Export system log to 34
- Firmware version 34
- Import system 34
- Reset to factory 34
- Setting to client 34
- Software update 34
- Firmware version 35
- Gateway 35
- Ip address 35
- Loader version 35
- Subnet mask 35
- System status 35
- Using the network configuration 35
- Kernel 36
- Client list 37
- Radius setup 37
- User list 37
- Using the network configuration 37
- Admin password 38
- New password 38
- Old password 38
- Using the network configuration 38
- Using the network configuration 39
- Setup authentication in client 40
- Setup md5 authentication in client 40
- Setup authentication in client setup md5 authentication in client 41
- Address 42
- Automatically 42
- Obtain an ip 42
- Select the item 42
- Setup authentication in client setup md5 authentication in client 42
- Setup authentication in client setup md5 authentication in client 43
- Setup authentication in client setup md5 authentication in client 44
- Setup authentication in client setup md5 authentication in client 45
- Setup authentication in client 46
- Setup tls authentication in client 46
- Setup authentication in client setup tls authentication in client 47
- Setup authentication in client setup tls authentication in client 48
- Setup authentication in client setup tls authentication in client 49
- Setup authentication in client 50
- Setup tls authentication in client 50
- Setup authentication in client setup tls authentication in client 51
- Setup authentication in client setup tls authentication in client 52
- Setup authentication in client setup tls authentication in client 53
- Setup authentication in client setup tls authentication in client 54
- Setup authentication in client setup tls authentication in client 55
- Choose internet 56
- Click properties 56
- Connection 56
- Network 56
- Properties pops 56
- Protocol 56
- Setup authentication in client setup tls authentication in client 56
- Tcp ip 56
- When the dialogue 56
- Window wireless 56
- Address 57
- Automatically 57
- Obtain an ip 57
- Select the item 57
- Setup authentication in client setup tls authentication in client 57
- Setup authentication in client setup tls authentication in client 58
- Setup authentication in client setup tls authentication in client 59
- Setup authentication in client setup tls authentication in client 60
- Connecting additional computers to the drs 200 61
- Default settings 63
- Resetting the drs 200 to the factory 63
- Contacting technical support 64
- Warranty and registration 65
- Act of 1976 contents are subject to change without prior notice copyrigh 69
- Copyright statement no part of this publication or documentation accompanying this 69
- D link corporation d link systems inc all rights reserved 69
- Derivative such as translation transformation or adaptation without permission from 69
- Dlink corporation d link systems inc as stipulated by the united states copyright 69
- Product may be reproduced in any form or by any means or used to make any 69
Похожие устройства
- Canon SX50 HS Инструкция по эксплуатации
- Targus TEB01 Black Инструкция по эксплуатации
- Philips 190C7FS Инструкция по эксплуатации
- Samsung RSE8*** Инструкция по эксплуатации
- D-Link DNR-322L Инструкция по эксплуатации
- Canon PowerShot A3500 IS Black Инструкция по эксплуатации
- Targus AWE55UE Black Инструкция по эксплуатации
- Philips 170C7FS Инструкция по эксплуатации
- LG DKS-7100S Инструкция по эксплуатации
- D-Link DNR-326 Инструкция по эксплуатации
- Philips 170X7FB Инструкция по эксплуатации
- Philips 190X7FB Инструкция по эксплуатации
- Vitek VT-1600 Инструкция по эксплуатации
- Bosch WLF16180OE Инструкция по эксплуатации
- Philips 190WV7CS Инструкция по эксплуатации
- D-Link DNS-300 Инструкция по эксплуатации
- Philips 220EW8FB Инструкция по эксплуатации
- D-Link DNS-312H Инструкция по эксплуатации
- Scarlett SC-1134S Инструкция по эксплуатации
- Philips 170C8FS Инструкция по эксплуатации