D-Link DES-1210-10/ME [48/129] Configuratio

D-Link DES-1210-10/ME [48/129] Configuratio
4 Configuration DES-1210 Metro Ethernet Managed Switch User Manual
42
Regardless of other normal VLANs that are incorporated on the Switch, users may add any ports to the
multicast VLAN where they wish multicast traffic to be sent. Users are to set up a source port, where the
multicast traffic is entering the switch, and then set the ports where the incoming multicast traffic is to be sent.
The source port cannot be a recipient port and if configured to do so, will cause error messages to be
produced by the switch. Once properly configured, the stream of multicast data will be relayed to the receiver
ports in a much more timely and reliable fashion.
The ISM VLAN Settings page allows the user to configure the ISM VLAN.
Figure 4.65 - Configuration > IGMP Snooping > ISM VLAN Settings
ISM VLAN Global State: Enable or disable the IGMP Snooping Multicast (ISM) VLAN Global State.
Click Apply button to confirm the ISM VLAN Global State.
VID: Add the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between 2 and 4094.
State: Use the drop-down menu to enable or disable the selected Multicast VLAN.
Member Ports: Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the
untagged members of the multicast VLAN.
Tagged Member Ports: Enter a port or list of ports that will become tagged members of the Multicast VLAN.
UnTagged Source Ports: Enter a port or list of ports that will become unagged members of the Multicast
VLAN.
VLAN Name: Enter the name of the new Multicast VLAN to be created. This name can be up to 32
characters in length.
IPv4 Replace Source: This field is used to replace the source IPv4 address of incoming packets sent by the
host before being forwarded to the source port.
IPv6 Replace Source IP: This field is used to replace the source IPv6 address of incoming packets sent by
the host before being forwarded to the source port.
Source Ports: Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the
tagged members of the multicast VLAN.
Click Add to add the ISM VLAN which will appear in the table, or click Clear All to clear all fields.
Click Edit button to modify the parameters and update the ISM VLAN Setting or click Delete to delete the
ISM VLAN.
Click View to display the detail information of ISM VLAN.
Figure 4.66 - Configuration > IGMP Snooping > ISM VLAN Settings

Содержание

Похожие устройства