![Aten PG95330 [51/136] When you have finished making your configuration settings click save](/img/pdf.png)
Aten PG95330 [51/136] When you have finished making your configuration settings click save
![Aten PG95330 [51/136] When you have finished making your configuration settings click save](/views2/1978006/page51/bg33.png)
Chapter 5. Energy
57
When you have finished making your configuration settings, click Save.
Auto Ping
Method
Auto Ping Method defines the mechanism which the eco PDU uses
to ping a device and to reboot the outlet. To enable this setting, check
the Enable checkbox, or check the Disable checkbox to disable.
Outlet Control
Enable this setting to reboot the outlet when the eco PDU fails to
ping the device for the specified number of times, as set in the
Cont. Failed Pings (Reboot Outlet) field.
Ping Interval
Enter the number of seconds to elapse between each auto-ping
that is sent to test the network device.
Wait Time Before First Ping
Enter the duration to wait before the outlet is powered on during
a reboot.
Cont. Failed Pings (Reboot Outlet)
Enter the maximum number of times that the eco PDU pings the
specified device after an initial failure.
Max Outlet Reboot Times
Enter the maximum number of times that the eco PDU reboots
the specified device after the consecutive pings, as specified in
the Cont. Fail Reset field.
IP Address
Enter the IP address of the device you want to ping.
Control/Display Description
Содержание
- Compliance statements 2
- Industry canada statement this class a digital apparatus complies with canadian ices 003 3
- Pe device safety notice 3
- Product information 3
- Rohs this product is rohs compliant 3
- Be sure to register your product at our online support center 4
- For telephone support call this number 4
- Online registration 4
- Telephone support 4
- User information 4
- User notice 4
- For information about all aten products and how they can help you connect without limits visit aten on the web or contact an aten authorized reseller visit aten on the web for a list of locations and telephone numbers 5
- Product information 5
- Package contents 6
- Basic operation and first time setup 7
- Chapter 1 7
- Chapter 2 7
- Chapter 3 7
- Contents 7
- Hardware setup 7
- Introduction 7
- Chapter 4 8
- Chapter 5 8
- Chapter 6 8
- Chapter 7 8
- Chapter 8 8
- Energy 8
- Logging in 8
- User management 8
- Chapter 9 9
- Appendix 10
- Chapter 10 10
- Chapter 11 10
- Lcd menu 10
- Telnet commands 10
- About this manual 12
- Introductio 12
- Conventions 13
- Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the unit and or connected devices 13
- The product may be updated with features and functions added improved or removed since the release of this manual for an up to date user manual visit http www aten com global en 13
- This manual uses the following conventions 13
- This page intentionally left blank 14
- Chapter 1 15
- Introduction 15
- Overview 15
- Features 16
- Proactive overload protection pop 17
- Cable holders 18
- Requirements 18
- Chapter 1 introduction 19
- Com pon port 19
- Components 19
- Environmental sensor port 19
- Front view 19
- Full details of this section are provided on page 26 19
- Lan ports 19
- No item description 19
- Power outlets 30 in total 24 x iec 60320 c13 6 x iec 60320 c19 bank 1 1 outlet 1 10 8 x c13 2 x c19 bank 1 2 outlet 11 20 8 x c13 2 x c19 bank 1 3 outlet 21 30 8 x c13 2 x c19 19
- Readout section and leds 19
- Reset switch 19
- Status panel the status panel contains 19
- Usb type a port 19
- Note holes for aten lok u plug cable holders are located around the 20
- Outlets see rs 232 command list page 34 for further information 20
- Status panel 20
- This page intentionally left blank 22
- Before you begin 23
- Chapter 2 23
- Hardware setup 23
- May look different from the pg series 23
- Note the eco pdu used in the above diagram is only used for reference it 23
- Rack mount 23
- The eco pdu can be mounted in a 0u configuration on the side of a rack to mount the device onto a rack use the mounting brackets provided the brackets can be attached either near the top and bottom of the back panel or to the top and bottom ends of the device as shown in the diagram below 23
- Rack mount lock positions 24
- Pdu placement 25
- Installation 26
- Installation diagram 27
- Please refer to the table and figure below for the rs 232 management and the list of commands 28
- Rs 232 command list 28
- Cascade 29
- Securing the cables 29
- Bridge 30
- Concatenate eco pdus by bridge and cascade 31
- This page intentionally left blank 32
- Basic operation and first time setup 33
- Browser 33
- Chapter 3 33
- Eco dc 33
- Operation methods 33
- First time setup 34
- Network configuration 35
- Changing the administrator login 36
- Moving on 37
- This page intentionally left blank 38
- Chapter 4 39
- Logging in 39
- The eco pdu main page 40
- Page components 41
- The energy page has two tabs connections and configuration as described in the chapters that follow 41
- The web page screen components are described in the table below 41
- This page intentionally left blank 42
- Chapter 5 43
- Connections 43
- Energy 43
- Pdu status 43
- Inlet status 44
- Sensor status 44
- Bank status 45
- Outlet status 46
- Configuration 47
- Pop setting 47
- Bank configuration 48
- Bank pop priority list 48
- Power on time schedule settings 48
- Outlet configuration 49
- Outlet configuration this page lets you set up the power management configuration for the selected outlet the meanings of the field headings are described in the following table 49
- When you have finished making your configuration settings click save 51
- This page intentionally left blank 52
- Chapter 6 53
- Overview 53
- User management 53
- Administrator information 54
- Snmpv1 v2c community 54
- Snmpv3 account information 54
- Telnet 54
- User information 55
- Chapter 7 57
- The system log event list 58
- Notification settings 59
- This page intentionally left blank 60
- Chapter 8 61
- Device configuration 61
- Device management 61
- General 61
- An explanation of the fields is given in the table below 62
- As a security measure if a firewall is being used the administrator can specify the port numbers that the firewall will allow if a port other than the default is used users must specify the port number as part of the ip address when logging in if an invalid port number or no port number is specified the eco pdu will not be found 62
- If there is no firewall on an intranet for example it doesn t matter 62
- Note 1 valid entries for all of the service ports are from 1 to 65535 62
- Select whether to allow only secure browser logins as shown below 62
- Service ports 62
- The service ports cannot have the same value you must set a different value for each 62
- What these numbers are set to since they have no effect 62
- Ipv4 configuration 63
- Serial settings 63
- Ipv6 configuration 65
- Event notification 66
- Smtp server 66
- Snmp trap receivers 67
- Date time 68
- Syslog server 68
- Manual input 69
- Time zone 69
- Finishing up 70
- Network time 70
- Security 71
- Tls support 71
- Working mode 71
- Account policy 72
- Ipinstaller setting 72
- Session timeout 72
- Check a policy and enter the required information in the appropriate fields 73
- If any filters have been configured they appear in the ip filter and or mac filter list boxes 73
- If the include button is checked all addresses within the filter range are allowed access while all other addresses are denied access 73
- Ip and mac filters control access to the eco pdu based on the ip and or mac addresses of the client computers attempting to connect a maximum of 5 ip filters and 5 mac filters are allowed 73
- Ip filter mac filter 73
- To enable ip and or mac filtering check the ip filter enable and or mac filter enable checkbox 73
- Authentication authorization 75
- Private certificate 78
- The wireless network page allows you to enable the wi fi capability of the eco pdu 80
- Wireless network 80
- Ipv4 configuration 81
- Ipv6 configuration 82
- Adding a pdu 83
- Cascade 83
- Connecting a pdu 84
- Deleting a pdu 84
- Discovering 84
- The rules page allows you to manage and set rules for the eco pdu in your installation 85
- Creating an event 86
- Scheduler 86
- This page intentionally left blank 88
- Chapter 9 89
- Upgrade main firmware 89
- A description of the items shown in this panel are given in the table below 90
- Click the browse button to locate and select the downloaded firmware upgrade file 90
- Click upgrade to start the upgrade procedure 90
- Firmware file 90
- Firmware file when you click the upgrade main firmware tab the display opens with the firmware file menu page which looks similar to the one below 90
- Go to our website and download the firmware upgrade file to a convenient location on your computer 90
- If you enabled check main firmware version the current firmware is compared with that of the upgrade file if the current version is equal to or higher than the upgrade version a popup message appears to inform you of the situation and stops the upgrade procedure 90
- Upgrading the firmware to upgrade the firmware refer to the ui snapshot on the preceding page and do the following 90
- Backup 91
- Backup restore 91
- Station list 91
- Restore 92
- Chapter 10 93
- Lcd menu 93
- Readout section on eco pdu 93
- The readout section on aten eco pdu contains an lcd display for users to check the settings of the unit and 3 buttons that deliver the following functions 93
- Home screen 94
- Once the unit is connected to an ac power source and turned on home screen shows on the lcd display 94
- Press enter button for 2 seconds to enter the main menu page see the following sections for more information and operation about the functions listed on the main menu 95
- Press select button again to separately check the status of l1 l2 and l3 95
- Press select button and you will enter the page which shows the unbalanced current of l1 l2 and l3 by percentage whose range is from 0 to 200 95
- Inlet inlet 97
- Measurement 97
- Users are able to check the following information about your eco pdu 97
- Sensor 98
- Switch on off 98
- Choose the action and then press enter to take the selected action 99
- Device device 99
- On bank selection list press select button to select the bank you d like to check and then press enter button to select the following actions or 99
- On the main menu screen select switch on off and then press enter button to enter the detailed page and depending on the model you may enter the following subpages 99
- Press enter button to enter device detailed page press select to 99
- Press select button to select the outlet to be checked and press enter button to enter the outlet detailed page to select the action to be taken 100
- Network 101
- Network page contains 2 subpages ip and bridge 101
- Cascade 102
- Cascade page displays the eco pdu s status as illustrated below 102
- Settings 103
- To download the event log of your eco pdu please insert a usb drive to usb type a port in advanced see status panel page 26 for details 104
- To back up or restore the configurations of the eco pdu or to perform firmware upgrade please insert a usb drive to usb type a port in advanced see status panel page 26 for details 105
- This page intentionally left blank 106
- Chapter 11 107
- Remote terminal operations 107
- Telnet 107
- Telnet commands 107
- Logging in 108
- A live telnet connection would be terminated if there is no incoming data with 60 seconds 109
- Session timeout 109
- Commands 110
- Verification 110
- By default 111
- Command outlet number option enter 111
- For example if you want to read the status of outlet 01 with a simple return string type the following read status o01 simple enter 111
- For example if you want to read the status of outlet 12 with a format return string type the following read status o12 format enter 111
- Note 1 each command string can be separated with a space 2 the option command string can be skipped and format will be used 111
- Outlet status 111
- Read power outlet status 111
- The following table lists the available read outlet status commands 111
- The following tables show the possible values for the read outlet status commands 111
- The formula for read outlet status commands is as follows 111
- The read power outlet status command allows you to view the power status of an outlet on the eco pdu 111
- Command outlet number option control enter 112
- For example if you want to reboot outlet 03 type the following 112
- For example if you want to switch off outlet 04 immediately type the following 112
- For example if you want to switch on outlet 01 with the time delay set for the outlet type the following 112
- Sw o01 delay on enter 112
- Sw o03 reboot enter 112
- Sw o04 imme off enter 112
- Switch outlet status 112
- The following tables show the possible values for the switch outlet status commands 112
- The formula for switch outlet status commands is as follows 112
- The switch outlet status command allows you to change the power status of an outlet on the eco pdu 112
- By default 113
- Note 1 each command string can be separated with a space 113
- The following table lists the available switch outlet status commands 113
- The option command string can be skipped and delay will be used 113
- Command outlet number option enter 114
- For example if you want to read environmental sensor 01 with a format return sting type the following 114
- For example if you want to read environmental sensor 02 with a simple return string type the following 114
- Read environmental value 114
- Read sensor o01 format enter 114
- Read sensor o02 simple enter 114
- The following tables show the possible values for the read environmental value commands 114
- The formula for read environmental value commands is as follows 114
- The read environmental value command allows you to view measurements from the eco pdu s environmental sensors 114
- By default 115
- Close telnet session 115
- Command enter 115
- For example if you want to disconnect the telnet session type the following 115
- Note 1 each command string can be separated with a space 115
- Quit enter 115
- The close telnet session command allows you to disconnect the telnet session from the eco pdu 115
- The following table lists the available read environmental value commands 115
- The following table lists the close telnet session command 115
- The following table shows the value for the close telnet session command 115
- The formula for the close telnet session command is as follows 115
- The option command string can be skipped and format will be used 115
- Command enter 116
- Eco pd 116
- For example if you want to reboot the eco pdu type the following 116
- For example if you want to reset the eco pdu type the following clearallsetting enter 116
- Reboot enter 116
- Reboot pdu device 116
- Reset all pdu config to default value 116
- The following table lists the available reboot pdu device command 116
- The following tables show the possible values for the read environmental value commands 116
- The following tables show the possible values for the reset all pdu config to default value commands 116
- The formula for reboot pdu device commands is as follows 116
- The formula for reset all pdu config to default value commands is as follows command enter 116
- The reboot pdu device command allows you to reboot the eco pdu 116
- The reset all pdu config to default command allows you to reset the eco pdu to the default factory settings 116
- Eco pd 117
- The following table lists the available reset all pdu config to default value command 117
- This page intentionally left blank 118
- Appendix 119
- General 119
- Safety instructions 119
- Rack mounting 121
- Securing the power cables 121
- The eco pdu s main power cord 121
- Recovery procedure 122
- Resetting the circuit breaker 122
- International 123
- North america 123
- Technical support 123
- Ip address determination 124
- Method 1 124
- Method 2 125
- Method 3 125
- Pg95230b pg95230b2 pg95230g 126
- Specifications 126
- Pg95330b pg95330b2 pg95330g 127
- Pg96230b pg96230b2 pg96230g 129
- Pg96330b pg96330b2 pg96330g 130
- Pg98230b pg98230b2 pg98230g 132
- Pg98330b pg98330b2 pg98330g 133
- Administrator login failure 135
- Aten standard warranty policy 136
- Limited hardware warranty 136
Похожие устройства
- Aten PE5224TA Краткое руководство по установке
- Aten PE5224TA Руководство пользователя
- Aten PE5221T Краткое руководство по установке
- Aten PE5221T Руководство пользователя
- Aten PE5342TG Краткое руководство по установке
- Aten PE5342TG Руководство пользователя
- Aten PE5340SL Краткое руководство по установке
- Aten PE5340SL Руководство пользователя
- Aten PE5108 Удаленное управление терминалом
- Aten PE5108 Инструкция
- Aten PE5108 Краткое руководство по установке
- Aten PE5108 Руководство пользователя
- Aten PE5208 Удаленное управление терминалом
- Aten PE5208 Инструкция
- Aten PE5208 Краткое руководство по установке
- Aten PE5208 Руководство пользователя
- Aten PE1216 Руководство пользователя
- Aten PE1216 Краткое руководство по установке
- Aten PE1324 Руководство пользователя
- Aten PE1324 Краткое руководство по установке