![Aten PE4104G [40/84] Device configuration](/img/pdf.png)
Aten PE4104G [40/84] Device configuration
![Aten PE4104G [40/84] Device configuration](/views2/1978081/page40/bg28.png)
IP Control Box User Manual
30
Setup
The Setup tab provides Device Configuration and Security settings. The Device
Configuration page allows administrators to configure the IP Control Box’s
system settings. The Security page controls access to the PDU.
Device Configuration
This page presents information about the selected device, as described in the
following sections:
General
Item Meaning
PDU Name This field lets you give the device a unique name. Simply delete
whatever is in the text box and key in the name of your choice.
Click Save (located at the bottom of the page) to save the new
name.
MAC Address
This item displays the
IP Control Box
’s MAC address.
Firmware Version This item displays the current firmware version number. You can
reference it to see if there are newer versions available on the
ATEN website.
Rack Location
Name
This field lets you give the rack location a unique name for easy
reference.
Содержание
- Pe4104aj pe4104g 1
- Compliance statements 2
- Online registration 4
- Telephone support 4
- User information 4
- User notice 4
- Package contents 5
- Product information 5
- Basic operation and first time setup 6
- Browser operation 6
- Chapter 1 6
- Chapter 2 6
- Chapter 3 6
- Chapter 4 6
- Contents 6
- Hardware setup 6
- Introduction 6
- Appendix 8
- Chapter 5 8
- Telnet commands 8
- About this manual 9
- Conventions 10
- This manual uses the following conventions 10
- Chapter 1 11
- Introduction 11
- Overview 11
- Features 12
- Requirements 13
- Cable holders 14
- Cable holders are optional accessories for added safety use aten lok u plug cable holders to secure the cables from your attached devices in place on the eco pdu unit use only the aten lok u plug cable holders that have been specifically designed to work with the eco pdu using any other kind of cable securing device could be highly dangerous for more information see securing the cable page 10 14
- Optional accessories 14
- Sensor management 14
- Sensor management sensors can be managed via the ip control box s built in graphical user interface gui or with the eco dc software that can be downloaded from the aten website 14
- Sensors 14
- Sensors are optional accessories you can use the ip control box unit without sensors however if you want to have complete energy management of an instrumented data center with the use of the ip control box you would need to use eco dc software and install sensor to generate a complete energy efficient data and chart higher sensor installation density is helpful to generate more accurate data a sensor enabled installation is required to generate a more complete energy efficient data and chart higher sensor installation density is helpful to generate more accurate data available sensors are show in the table below 14
- Components 15
- This page intentionally left blank 16
- Chapter 2 17
- Desktop mount 17
- Hardware setup 17
- Rack mounting 17
- Using the rack mount ears 17
- Installation 19
- Securing the cable 20
- Basic operation and first time setup 21
- Browser 21
- Chapter 3 21
- Eco dc 21
- Operation methods 21
- First time setup 22
- Changing the administrator login 23
- Network configuration 23
- Moving on 24
- Browser operation 25
- Chapter 4 25
- Logging in 25
- After you have successfully logged in the ip control box main page comes up with the energy connections page displayed 27
- And permissions not all of these elements appear 27
- Note the screen depicts an administrator s page depending on a user s type 27
- Page components 27
- The eco pdu main page 27
- The web page screen components are described in the table below 27
- Connections 28
- Energy 28
- Pdu status 28
- Outlet status 29
- Sensor status 29
- Buzzer setting 30
- Configuration 30
- Outlet configuration 30
- Power on time schedule settings 30
- When you have finished making your configuration settings click save 33
- Administrator information 34
- Snmpv3 account information 34
- Snmpv1 v2c community 35
- Telnet 35
- User information 35
- When you have finished making your configuration settings click save 36
- System log 37
- Notification settings 38
- Device configuration 40
- General 40
- Ip control bo 40
- The setup tab provides device configuration and security settings the device configuration page allows administrators to configure the ip control box s system settings the security page controls access to the pdu 40
- This page presents information about the selected device as described in the following sections 40
- Service ports 41
- Ipv4 configuration 42
- Event notification 43
- Date time 46
- Finishing up 47
- Security 48
- Account policy 49
- Ipinstaller setting 49
- Session timeout 49
- Tls support 49
- Working mode 49
- Check a policy and enter the required information in the appropriate fields 50
- If any filters have been configured they appear in the ip filter and or mac filter list boxes 50
- If the include button is checked all the addresses within the filter range are allowed access all other addresses are denied access 50
- Ip and mac filters control access to the eco pdu based on the ip and or mac addresses of the client computers attempting to connect a maximum of 5 ip filters and 5 mac filters are allowed 50
- Ip filter mac filter 50
- To enable ip and or mac filtering click to put a check mark in the ip filter enable and or mac filter enable checkbox 50
- Authentication authorization 53
- Private certificate 54
- Ecotcp 55
- Scheduler 56
- A description of the items shown in this panel are given in the table below 58
- Firmware file 58
- Firmware file when you click the upgrade main firmware tab the display opens with the firmware file menu page which looks similar to the one below 58
- Go to our website and download the new firmware file to a convenient location on your computer 58
- The pdu tab is used to upgrade the pe4104g s firmware and to backup and restore the device s configuration settings 58
- The upgrade main firmware page is used to upgrade the firmware of the ip control box 58
- To upgrade the firmware refer to the screenshot on the preceding page and do the following 58
- Upgrade main firmware 58
- Upgrading the firmware 58
- Backup 60
- Backup restore 60
- Station list 60
- Restore 61
- This page intentionally left blank 62
- Chapter 5 63
- Logging in 63
- Remote terminal operations 63
- Telnet 63
- Telnet commands 63
- Session timeout 64
- Commands 65
- Verification 65
- By default 66
- Command outlet number option enter 66
- For example if you want to read the status of outlet 01 with a simple return string type the following read status o01 simple enter 66
- For example if you want to read the status of outlet 12 with a format return string type the following read status o12 format enter 66
- Note 1 each command string can be separated with a space 2 the option command string can be skipped and format will be used 66
- Outlet status 66
- Read power outlet status 66
- The following table lists the available read outlet status commands 66
- The following tables show the possible values for the read outlet status commands 66
- The formula for read outlet status commands is as follows 66
- The read power outlet status command allows you to view the power status of an outlet on the ip control box 66
- Command outlet number option control enter 67
- For example if you want to reboot outlet 03 type the following 67
- For example if you want to switch off outlet 04 immediately type the following 67
- For example if you want to switch on outlet 01 with the time delay set for the outlet type the following 67
- Sw o01 delay on enter 67
- Sw o03 reboot enter 67
- Sw o04 imme off enter 67
- Switch outlet status 67
- The following tables show the possible values for the switch outlet status commands 67
- The formula for switch outlet status commands is as follows 67
- The switch outlet status command allows you to change the power status of an outlet on the ip control box 67
- By default 68
- Note 1 each command string can be separated with a space 68
- The following table lists the available switch outlet status commands 68
- The option command string can be skipped and delay will be used 68
- Command outlet number option enter 69
- For example if you want to read environmental sensor 01 with a format return sting type the following 69
- For example if you want to read environmental sensor 02 with a simple return string type the following 69
- Read environmental value 69
- Read sensor o01 format enter 69
- Read sensor o02 simple enter 69
- The following tables show the possible values for the read environmental value commands 69
- The formula for read environmental value commands is as follows 69
- The read environmental value command allows you to view measurements from the ip control box s environmental sensors 69
- By default 70
- Close telnet session 70
- Command enter 70
- For example if you want to disconnect the telnet session type the following 70
- Note 1 each command string can be separated with a space 70
- Quit enter 70
- The close telnet session command allows you to disconnect the telnet session from the ip control box 70
- The following table lists the available read environmental value commands 70
- The following table lists the close telnet session command 70
- The following table shows the value for the close telnet session command 70
- The formula for the close telnet session command is as follows 70
- The option command string can be skipped and format will be used 70
- Command enter 71
- For example if you want to reboot the ip control box type the following 71
- For example if you want to reset the ip control box type the following clearallsetting enter 71
- Ip control bo 71
- Reboot enter 71
- Reboot pdu device 71
- Reset all pdu config to default value 71
- The following table lists the available reboot pdu device command 71
- The following tables show the possible values for the read environmental value commands 71
- The following tables show the possible values for the reset all pdu config to default value commands 71
- The formula for reboot pdu device commands is as follows 71
- The formula for reset all pdu config to default value commands is as follows command enter 71
- The reboot pdu device command allows you to reboot the ip control box 71
- The reset all pdu config to default command allows you to reset the ip control box to the default factory settings 71
- Ip control bo 72
- The following table lists the available reset all pdu config to default value command 72
- Appendix 73
- General 73
- Safety instructions 73
- Rack mounting 75
- Administrator login failure 76
- Ip address determination 77
- Method 1 77
- Method 2 78
- Method 3 78
- International 79
- North america 79
- Technical support 79
- Pe4104aj 80
- Specifications 80
- Pe4104g 82
- Aten standard warranty policy 84
- Limited hardware warranty 84
Похожие устройства
- Aten EC1000 Руководство пользователя
- Aten EC1000 Инструкция
- Aten EC1000 Краткое руководство по установке
- Aten EHS-127870-19 Руководство пользователя
- Aten RS22U80 Руководство пользователя
- Aten UC8000 Краткое руководство по установке
- Aten UC8000 Руководство пользователя
- Aten StreamLIVE PRO UC9040 RESTful API Инструкция
- Aten StreamLIVE PRO UC9040 Руководство пользователя
- Aten StreamLIVE PRO UC9040 Краткое руководство по установке
- Aten StreamLIVE PRO UC9040 Руководство пользователя 2
- Aten CAMLIVE PRO UC3022 Краткое руководство по установке
- Aten CAMLIVE PRO UC3022 Руководство пользователя
- Aten CAMLIVE + UC3021 Краткое руководство по установке
- Aten CAMLIVE + UC3021 Руководство пользователя
- Aten StreamLIVE HD UC9020 RESTful API Инструкция
- Aten StreamLIVE HD UC9020 Руководство по программному обеспечению
- Aten StreamLIVE HD UC9020 Краткое руководство по установке
- Aten StreamLIVE HD UC9020 Руководство пользователя
- Aten CAMLIVE UC3020 Краткое руководство по установке