Hitachi G14DSL [11/104] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hitachi G14DSL [11/104] English

Hitachi G14DSL [11/104] English
10
English
Table 1
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for 0.1
seconds. (off for 0.1 seconds)
Lights continuously
Before
charging
While
charging
Charging
complete
Charging
impossible
Blinks
Lights
Blinks
Flickers
Lights
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).
Overheat
standby
The
pilot
lamp
lights or
blinks in
red.
The
pilot lamp
lights in
green.
(2) Regarding the temperatures of the rechargeable
battery
The temperatures for rechargeable batteries are as
shown in Table 2, and batteries that have become
hot should be cooled for a while before being
recharged.
Table 2 Recharging ranges of batteries
(3) Regarding recharging time
Depending on the combination of the charger and
batteries, the charging time will become as shown
in Table 3.
Table 3 Charging time (At 20°C)
NOTE:
The charging time may vary according to
temperature and power source voltage.
4. Disconnect the charger’s power cord from the
receptacle.
5. Hold the charger firmly and pull out the battery.
NOTE:
After operation, pull out batteries from the charger
first, and then keep the batteries properly.
How to make the batteries perform longer
(1) Recharge the batteries before they become
completely exhausted.
When you feel that the power of the tool becomes
weaker, stop using the tool and recharge its battery.
If you continue to use the tool and exhaust the
electric current, the battery may be damaged and
its life will become shorter.
(2) Avoid recharging at high temperatures.
A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after
use, its internal chemical substance will deteriorate,
and the battery life will be shortened. Leave the
battery and recharge it after it has cooled for a
while.
CAUTION
䡬 When the battery charger has been continuosly
used, the battery charger will be heated, thus
constituting the cause of the failures. Once the
charging has been completed, give 15 minutes rest
until the next charging.
䡬 If the battery is recharged when it is warm due to
battery use or exposure to sunlight, the pilot lamp
map light in green.
The battery will not be recharged. In such a case,
let the battery cool before charging.
䡬 When the pilot lamp flickers in red (at 0.2-second
intervals), check for and take out any foreign objects
in the charger’s battery installation hole. If there are
no foreign objects, it is probable that the battery
or charger is malfunctioning. Take it to your
authorized Service Center.
PRIOR TO OPERATION
1. Preparing and checking the work environment
Make sure that the work site meets all the conditions
laid forth in the precautions.
2. Checking the battery
Make sure that the battery is installed firmly. If it
is at all loose it could come off and cause an
accident.
3. Fitting and adjusting the wheel guard
The wheel guard is a protective device to prevent
injury should the depressed center wheel shatter
during operation. Ensure that the guard is properly
fitted and fastened before commencing grinding
operation. By slightly loosening the setting screw,
the wheel guard can be turned and set at any
desired angle for maximum operational
effectiveness. Ensure that the setting screw is
thoroughly tightened after adjusting the wheel guard.
Temperatures at
Rechargeable batteries
which the battery
can be recharged
BSL1430
0°C – 40°C
Charger
UC18YRSL
Battery
BSL1430 Approx. 45 min.
01Eng_G14DSL_EE 08/2/29, 18:1710

Содержание

Похожие устройства

English Table 1 Indications of the pilot lamp The pilot lamp lights or blinks in red Before charging Blinks Lights for 0 5 seconds Does not light for 0 5 seconds off for 0 5 seconds While charging Lights Lights continuously Charging complete Blinks Lights for 0 5 seconds Does not light for 0 5 seconds off for 0 5 seconds Charging impossible Flickers LightsforO 1 seconds Does not light for 0 1 seconds off for 0 1 seconds Overheat standby Lights Malfunction in the battery or the charger The pilot lamp lights in green 2 Lights continuously Regarding the temperatures of the rechargeable battery The temperatures for rechargeable batteries are as shown in Table 2 and batteries that have become hot should be cooled for a while before being recharged Table 2 Recharging ranges of batteries Rechargeable batteries BSL1430 Temperatures at which the battery can be recharged 0 C 40 C 3 Regarding recharging time Depending on the combination of the charger and batteries the charging time will become as shown in Table 3 Table 3 Charging time At 20 C Charger UC18YRSL Battery BSL1430 Approx 45 min NOTE The charging time may vary according to temperature and power source voltage 4 Disconnect the charger s power cord receptacle 5 Hold the charger firmly and pull out the battery NOTE After operation pull out batteries from the charger first and then keep the batteries properly Battery overheated Unable to charge Charging will commence when battery cools 2 Avoid recharging at high temperatures A rechargeable battery will be hot immediately after use If such a battery is recharged immediately after use its internal chemical substance will deteriorate and the battery life will be shortened Leave the battery and recharge it after it has cooled for a while CAUTION O When the battery charger has been continuosly used the battery charger will be heated thus constituting the cause of the failures Once the charging has been completed give 15 minutes rest until the next charging O If the battery is recharged when it is warm due to battery use or exposure to sunlight the pilot lamp map light in green The battery will not be recharged In such a case let the battery cool before charging O When the pilot lamp flickers in red at 0 2 second intervals check for and take out any foreign objects in the charger s battery installation noIe If there are no foreign objects it is probable that the battery or charger is malfunctioning Take it to your authorized Service Center PRIOR TO OPERATION from the How to make the batteries perform longer 1 Recharge the batteries before they become completely exhausted When you feel that the power of the tool becomes weaker stop using the tool and recharge its battery If you continue to use the tool and exhaust the electric current the battery may be damaged and its life will become shorter 1 Preparing and checking the work environment Make sure that the work site meets all the conditions laid forth in the precautions 2 Checking the battery Make sure that the battery is installed firmly If it is at all loose it could come off and cause an accident 3 Fitting and adjusting the wheel guard The wheel guard is a protective device to prevent injury should the depressed center wheel shatter during operation Ensure that the guard is properly fitted and fastened before commencing grinding operation By slightly loosening the setting screw the wheel guard can be turned and set at any desired angle for maximum operational effectiveness Ensure that the setting screw is thoroughly tightened after adjusting the wheel guard 10

Скачать