D-Link DGS-3000-28SC [170/444] Lldp med port settings

DGS-3000-28SC Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide

160

Fast Start Repeat

Count (1-10)

Enter a value between 1 and 10 for the fast start repeat count. When an LLDP-MED

Capabilities TLV is detected for an MSAP identifier not associated with an existing

LLDP remote system MIB, then the application layer shall start the fast start

mechanism and set the ‘medFastStart’ timer to ‘medFastStartRepeatCount’ times 1.

The default value is 4.

Click the Apply button to accept the changes made for each individual section.

LLDP-MED Port Settings

This window is used to enable or disable transmitting LLDP-MED TLVs.

To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Port Settings as shown

below.

Figure 4-127 LLDP-MED Port Settings window

The fields that can be configured are described below:

Parameter Description

Unit

Select the unit you want to configure.

From Port / To Port

Select the port range to use for this configuration.

NTCS

Use the drop-down menu to enable or disable Notification Topology Change Status.

State

Use the drop-down menu to enable or disable transmit LLDP-MED TLVs, and tick the

check boxes of the TLV types that the LLDP agent should transmit. TLV types are

Capabilities, Network Policy and Inventory. Tick the All check box to select all TLV

types.

Click the Apply button to accept the changes made.